SES light not flashing when code reader is plugged in? - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

SES light not flashing when code reader is plugged in?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • SES light not flashing when code reader is plugged in?

    ok so i posted earlier about more car running like crap and the SES light being on, ok i've been perplexed by this for a few days now, i bought the code reader plugged it in following all the steps and the SES light dosent blink or anything, the code reader manual says if this happens to refer to the service manual, so i bought the Haynes version, and it says that even if there are no codes present in the system that the light should blink code 12 to signify that the OBD system is functioning, well nowhere in teh manual at least that i can find says anything about diagnosing why the light isnt blinking, any suggestions guys on how to figure out why i cant ge the damn light to blink :mad:

    76 Camaro Rally Sport-355/TH350- Soon to be LT1/TH350 with a little laughing gas to wake it up...;)
    89 Ram D350 CTD/M5- 1 Ton Dually getting 27 MPG's

  • #2
    Re: SES light not flashing when code reader is plugged in?

    what page?
    2k2 camaro, K&N, SLP whisper lid, Konis, AEM, HP Tuners, Angel eyes/Halos, CF SS ram air hood, 4.10s, Zexel Torsen, UMI SFCs, CrossFire, BFGs, Gatorback, Catco, Flows, and TLC! DONT feed the Trolls!

    Comment


    • #3
      Re: SES light not flashing when code reader is plugged in?

      what do you mean?

      76 Camaro Rally Sport-355/TH350- Soon to be LT1/TH350 with a little laughing gas to wake it up...;)
      89 Ram D350 CTD/M5- 1 Ton Dually getting 27 MPG's

      Comment


      • #4
        Re: SES light not flashing when code reader is plugged in?

        Originally posted by ninety4three4
        the code reader manual says if this happens to refer to the service manual, so i bought the Haynes version, and it says that even if there are no codes present in the system that the light should blink code 12 to signify that the OBD system is functioning,
        haynes
        2k2 camaro, K&N, SLP whisper lid, Konis, AEM, HP Tuners, Angel eyes/Halos, CF SS ram air hood, 4.10s, Zexel Torsen, UMI SFCs, CrossFire, BFGs, Gatorback, Catco, Flows, and TLC! DONT feed the Trolls!

        Comment


        • #5
          Re: SES light not flashing when code reader is plugged in?

          section 6 page 3

          76 Camaro Rally Sport-355/TH350- Soon to be LT1/TH350 with a little laughing gas to wake it up...;)
          89 Ram D350 CTD/M5- 1 Ton Dually getting 27 MPG's

          Comment

          Latest Topics

          Collapse

          • Andy H
            Transmission removal help!!
            by Andy H
            Hey everyone! I've been trying to remove my transmission for two days now! I need to replace the clutch. Only thing I've got left holding the transmission...
            2 weeks ago
          • 2.8 Bird
            Abs inop
            by 2.8 Bird
            Hello, so I changed the front bearings on the bird and the ABS inoperative light came on. I made a mistake of not removing negative battery cable. Now...
            3 weeks ago
          • fishin
            Intermittent Headlight Function 97 Firebird
            by fishin
            I usually have to double, triple my headlight switch for them to come up on my 97 Firebird. I cleaned all connections. Could it be the headlight switch...
            3 weeks ago

          FORUM SPONSORS

          Collapse
          Working...
          X