cleaning house a bit,too many stickies!!! this thread will be for service info and maintenance information, if you have something you think you want to add, shoot me an email, if theres a maintenance tip you want to share do a full write up on it and pm or email me.
Gm service Information
http://cv6.fakeleg.com/
Make a bookmark for this site...it's very helpful to find some good information about your engine's performance.
http://www.bgsoflex.com/auto.html
RPO Decoder
http://www.camarosource.ca/php/camar...year=2001&tm=1
http://tech.firebirdv6.com/generalspecs.html
--------------------------------------------------------------------------
Oil filter adapter gasket p/n: 12337894
$2.46, $2.61 after tax at dealership
this is for those people who do not get this gasket in a kit, or something hainess happens to the stock part & it needs replacement
--------------------------------------------------------------------------
COOLING SYSTEM BLEEDING
All 3800-IIs Except "W" Body
1) Fill radiator to base of filler neck. Start engine. Place A/C-heater control in any position except MAX. Select highest temperature setting. Idle engine until lower radiator hose is hot.
2) Increase engine speed to 3000 RPM and then back to idle. Do this 5 times to expel any air trapped in system. Fill radiator as necessary. Install radiator cap. Allow engine to cool. Fill coolant recovery reservoir as necessary.
The Great misfire Mystery
http://web.camaross.com/forums/showt...threadid=78028
Gm service Information
http://cv6.fakeleg.com/
Make a bookmark for this site...it's very helpful to find some good information about your engine's performance.
http://www.bgsoflex.com/auto.html
RPO Decoder
http://www.camarosource.ca/php/camar...year=2001&tm=1
http://tech.firebirdv6.com/generalspecs.html
--------------------------------------------------------------------------
Oil filter adapter gasket p/n: 12337894
$2.46, $2.61 after tax at dealership
this is for those people who do not get this gasket in a kit, or something hainess happens to the stock part & it needs replacement
--------------------------------------------------------------------------
COOLING SYSTEM BLEEDING
All 3800-IIs Except "W" Body
1) Fill radiator to base of filler neck. Start engine. Place A/C-heater control in any position except MAX. Select highest temperature setting. Idle engine until lower radiator hose is hot.
2) Increase engine speed to 3000 RPM and then back to idle. Do this 5 times to expel any air trapped in system. Fill radiator as necessary. Install radiator cap. Allow engine to cool. Fill coolant recovery reservoir as necessary.
The Great misfire Mystery
http://web.camaross.com/forums/showt...threadid=78028
Comment