Tweet
back head bolt
do you guys know how to get the very back drivers side head bolt out on the 3.4? its really close to the firewall.
-
-
Re: back head bolt
do you have one of those wrenches that flexes up and down as if I remeber right that is how I did it... but you should be able to get in there with a stright braker bar ijust mess around with the angle and using deep sockets vs/ short socket + short extentionOriginally posted by Camster44
here is the link to the sears part but kind of pricy I think I got one for $15ish
http://www.sears.com/sr/javasr/produ...seBVCookie=Yes
-
I’m new. I actually don’t own a Camaro or firebird. I do have a 2000 Camaro 3.8 fly by throttle and 4l60e. This is installed in a 1980 Triumph TR7...1 week ago -
Not much going on, replaced my Kenwood double din stereo with a Pioneer double din, the Kenwood had problems. Then replaced my power inverter for my reverse...1 week ago -
Hi all new to the community here. I have a 2014 RS 6 speed manual... and so about a year ago my tail lights got cracked and eventually the plastic housing...3 weeks ago
Comment