Anyone who has reflashed their PCM-- - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

Anyone who has reflashed their PCM--

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Anyone who has reflashed their PCM--

    I'm pretty sure on this, but when doing a reflash of the PCM (from one year to another), the transmission type shouldn't matter, seeing as how the tranny isn't specified in the VIN, correct?
    Wife and a dog, they both think they\'re Kujo.<br /> <br />1999 3.8 A4 Y87<br />Navy Blue Metallic<br />BFG G-Force KDWS 275/40/17s, <br />WS6 Wheels (17x9)<br />Phoenix Transmissions 2400 Stall Converter<br />FRA, Holley Powershot filter, Whisper Lid, Ported Throttlebody<br />2000 manifolds, Flowmaster, WS6 Tail Pipes, <br />MSD 8.5mm Wires, MSD Coils, Autolite plugs<br />Performance Cryogenics treated rotors<br />1LE Sway Bars and panhard rod, 1LE front springs w/SLP Bilsteins, stock rear springs w/ 3rd Gen Bilsteins, BMR STB, KBDD SFCs, 1LE rear lower control arms, 1LE front lower control arms<p>1968 Chevelle Malibu 327 TH350

  • #2
    Anybody??
    Wife and a dog, they both think they\'re Kujo.<br /> <br />1999 3.8 A4 Y87<br />Navy Blue Metallic<br />BFG G-Force KDWS 275/40/17s, <br />WS6 Wheels (17x9)<br />Phoenix Transmissions 2400 Stall Converter<br />FRA, Holley Powershot filter, Whisper Lid, Ported Throttlebody<br />2000 manifolds, Flowmaster, WS6 Tail Pipes, <br />MSD 8.5mm Wires, MSD Coils, Autolite plugs<br />Performance Cryogenics treated rotors<br />1LE Sway Bars and panhard rod, 1LE front springs w/SLP Bilsteins, stock rear springs w/ 3rd Gen Bilsteins, BMR STB, KBDD SFCs, 1LE rear lower control arms, 1LE front lower control arms<p>1968 Chevelle Malibu 327 TH350

    Comment


    • #3
      <blockquote>quote:</font><hr>Originally posted by Guardsman:
      I'm pretty sure on this, but when doing a reflash of the PCM (from one year to another), the transmission type shouldn't matter, seeing as how the tranny isn't specified in the VIN, correct?<hr></blockquote>

      I believe you do need the same transmission type.

      I don't know if it's in the vin or not.

      But... I do know there is code in my pcm for the auto transmission. It controls shift points, sets a code if the transmission is detected to be slipping, etc. I would think a manual car, with an automatic pcm, would get a little weirded out if it didn't see the transmission there. And an automatic car, with a manual pcm, would probably not shift correctly, if at all.
      \'98 A4 Camaro v6-&gt;v8 conversion, and STS kit next<br />v6: 13.6 Powerdyne, 13.2 150 shot, 13.8 120 shot, 14.3 85 shot, 15.7 stock<br />v8(na): 12.18@113, 392rwhp<br />Moderator on <a href=\"http://www.mtfba.org\" target=\"_blank\">www.mtfba.org</a> and <a href=\"http://www.frrax.com\" target=\"_blank\">www.frrax.com</a> (Road Race & Autocross)<br /><a href=\"http://community.webshots.com/user/johnduncan10\" target=\"_blank\">Car pics</a>, <a href=\"http://www.trscca.com\" target=\"_blank\">TN Region SCCA</a>

      Comment

      Latest Topics

      Collapse

      There are no results that meet this criteria.

      FORUM SPONSORS

      Collapse
      Working...
      X