Welcome to the FirebirdV6.com/CamaroV6.com forums.
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact contact us.
If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
yeah it could throw a code it would be hard for the system to detect a bad map though. i cant say thats "is" the problem but if it where my vehicle thats what id be looking at.
just did that and yes a code came up heres what it said "pcm has determined that the maf input is lower than expected for current engine operating conditions" code p0102 and another code i havnt seen is p1460 says "wide open throttle a/c cutoff relay circuit"
I had the same problems. Changed my MAF and all was good. Of course, the MAF isn't a cheap part :( . But, if you have a K&N, over oiling it will cause your MAF to misread and possibly ruin it. I've heard you can clean the MAF with carb cleaner and it'll still work. I"m not 100% on that though, so.........
And auto666, you're such a post whore :) . That's ok though, I'm partly one.
there is something that i know i have seen at napa, but havent looked elsewhere for called MAF cleaner, probably better than carb cleaner, just a thought
ive aways used no chlorinated brake clean carb clean works to make sure the key is out of the ignition when you do it and let it dry 10 minutes before you even put the key in the run position
radracer thank you i try
Also, when is the last time you had a tune up? i find it funny that it doesn't miss in first gear, but whenever you are driving it and start to get into high rpm's it starts to sputter. At first thought I would say you are having a misfire, or maybe a bad coil.
But then I think about when I've had the problem of when I would get on a car and it gets to high rpm's it would start to sputter and it turned out to be a vacuum leak. So check all those lines as well. Also, depending on how many miles the car has on it, and if you are anywhere near a spark plug change, I would sea-foam the heck out of it. It can't hurt to try.
i have a 94 camaro 3.4 v-6 -when i mash into the gas she stutters and shakes and sounds as if shes misfiring-but as long as im light on the pedal shes fine and will run perfect.think its the tps?? what are the symtoms of a TPS going bad?
Hey everyone! I've been trying to remove my transmission for two days now! I need to replace the clutch. Only thing I've got left holding the transmission...
Hello, so I changed the front bearings on the bird and the ABS inoperative light came on. I made a mistake of not removing negative battery cable. Now...
I usually have to double, triple my headlight switch for them to come up on my 97 Firebird. I cleaned all connections. Could it be the headlight switch...
3 weeks ago
FORUM SPONSORS
Collapse
Working...
X
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Comment