Tweet
wiring and sensors and stuff
Ok, any help i could get here would be GREATLY appreciated. I'm swapping out the head gaskets on my 95 3.4 firebird. I haven't actually started putting it back together yet but my grave concern is that i wasn't paying quite enough attention when i was taking off all those little wires and injector connectors and all that business, is there any sort of comprehensive diagram or something to rescue idiots like me from my stupidity?
-
-
Re: wiring and sensors and stuff
should be pretty straight forward when you look at the harness and the length and position of each connecter.
haynes manual maybe or something like that could help -
Re: wiring and sensors and stuff
nope haynes manual is not really much help, i was kinda hoping that it would be like you said but my fear is that at this point i've moved everything around and pushed it all to the side and stuff that i've distorted the natural order of things in there. looks like a soup sandwich in there.Comment
-
Re: wiring and sensors and stuff
usually with gm wiring harnesses it only makes sense to plug things into one place, they dont give you much in the way of options where things workComment
-
Re: wiring and sensors and stuff
well injectors for example, you will see 6 like plugs, 2 pairs of 3 lined up.Comment
-
I’m new. I actually don’t own a Camaro or firebird. I do have a 2000 Camaro 3.8 fly by throttle and 4l60e. This is installed in a 1980 Triumph TR7...1 week ago -
Not much going on, replaced my Kenwood double din stereo with a Pioneer double din, the Kenwood had problems. Then replaced my power inverter for my reverse...1 week ago -
Hi all new to the community here. I have a 2014 RS 6 speed manual... and so about a year ago my tail lights got cracked and eventually the plastic housing...3 weeks ago
Comment