26lb GM injectors - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

26lb GM injectors

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 26lb GM injectors

    Hey guys Im going to be doing AR stage 2 or 3 heads with intakes very soon. As my car sits right now with the cam in it my stock injectors are almost at max and I know by adding the heads/intakes setup that they will be out maxed for sure. I have in my room a set of GM 26lb injectors off a 99 Camaro SS. Will these be enough injector for the install to do the job. I will be ordering the injector connectors from ZZP so that they will work on my car. I am also considering finishing the fuel system with a Walbro fuel pump. Would that be worth it with that setup. I will also be puting in a Vig 3k stall and 4.10 gear soon.
    01\'Y87 Firebird:Gt1 cam,Vig.3000 stall
    AR stage 3 heads/intakes to be installed
    www.cardomain.com/id/firehawknwv
    www.vaperz.com
    PEWTER MAFIA/ Kristen's "PEWTER MAFIA KING"

  • #2
    Re: 26lb GM injectors

    Actually I think the question I should ask is, what size injectors are you guys using. Im talking about those of y ou that have heads and ported intakes. Let me know that and that should help me find the right injector. Thanx.
    01\'Y87 Firebird:Gt1 cam,Vig.3000 stall
    AR stage 3 heads/intakes to be installed
    www.cardomain.com/id/firehawknwv
    www.vaperz.com
    PEWTER MAFIA/ Kristen's "PEWTER MAFIA KING"

    Comment


    • #3
      Re: 26lb GM injectors

      no way you are maxing stockers right now, with a head and cam setup, 26ers should work fine

      Comment


      • #4
        Re: 26lb GM injectors

        I said I was almost at max with those injectors. Read carefully UD, LOL. The HPtuners said I was at 90% duty cycle after we got done with the tune last year so I think we backed it off. Anyways I have the 26lb injectors as said and I will be ordering the connectors. Would a Walbro be a good addition to the setup?

        UD by the way your package will be at my house tomorrow as it looks now. Thanx again for the part bud.
        01\'Y87 Firebird:Gt1 cam,Vig.3000 stall
        AR stage 3 heads/intakes to be installed
        www.cardomain.com/id/firehawknwv
        www.vaperz.com
        PEWTER MAFIA/ Kristen's "PEWTER MAFIA KING"

        Comment


        • #5
          Re: 26lb GM injectors

          walbro would be fine

          Comment


          • #6
            Re: 26lb GM injectors

            How much power was you putting down before your turbo with just the heads and other mods.
            01\'Y87 Firebird:Gt1 cam,Vig.3000 stall
            AR stage 3 heads/intakes to be installed
            www.cardomain.com/id/firehawknwv
            www.vaperz.com
            PEWTER MAFIA/ Kristen's "PEWTER MAFIA KING"

            Comment


            • #7
              Re: 26lb GM injectors

              never had it dyno'd

              i was running heads/cam/rockers/intakes/headers/supporting mods

              Comment


              • #8
                Re: 26lb GM injectors

                That will be what I will be running. Ill be NA for a while to come after all of this work.
                01\'Y87 Firebird:Gt1 cam,Vig.3000 stall
                AR stage 3 heads/intakes to be installed
                www.cardomain.com/id/firehawknwv
                www.vaperz.com
                PEWTER MAFIA/ Kristen's "PEWTER MAFIA KING"

                Comment


                • #9
                  Re: 26lb GM injectors

                  are those multec injectors? You converting to bosch?

                  Comment


                  • #10
                    Re: 26lb GM injectors

                    VooDo: I looked at the injectors and they dont say what brand they are, but Im thinking they are Bosch injectors. They are 26lbers form a 98 SS that I do know for sure.
                    01\'Y87 Firebird:Gt1 cam,Vig.3000 stall
                    AR stage 3 heads/intakes to be installed
                    www.cardomain.com/id/firehawknwv
                    www.vaperz.com
                    PEWTER MAFIA/ Kristen's "PEWTER MAFIA KING"

                    Comment

                    Latest Topics

                    Collapse

                    There are no results that meet this criteria.

                    FORUM SPONSORS

                    Collapse
                    Working...
                    X