Tweet
I decided today because i was having idle issues to just hook up one of those cheap code scanners, and it showed code 33 and code 42. But my SES light was never on, then i went around the block and my SES light stayed on, so I pulled the ECM fuse and it went off, but the codes are still there, but the SES light stays off. Now one of the codes was for the MAP so i bought a new map sensor, hooked it up, pulled the ecm fuse but the code is still there, so i just returned the MAP sensor. Any idea's?
Listed are some parts ive recently changed,
IAC Sensor
TPS Sensor
Cap
Rotor
Plugs
Ran new vac line from vac tank to intake check valve
PCV valve
Air Filter
Fuel Filter
Ive ran fuel injector cleaner, and checked the fuel pressure which holds steady.
[ April 08, 2004, 04:04 AM: Message edited by: Javelin3o4 ]
Listed are some parts ive recently changed,
IAC Sensor
TPS Sensor
Cap
Rotor
Plugs
Ran new vac line from vac tank to intake check valve
PCV valve
Air Filter
Fuel Filter
Ive ran fuel injector cleaner, and checked the fuel pressure which holds steady.
[ April 08, 2004, 04:04 AM: Message edited by: Javelin3o4 ]
