Tweet
has anyone installed a shift light on their 98 firebird? Need some help here- could someone bring me through the connecting of the light to the tach wire... which wire is it? etc...
thanks!
Nate
thanks!
Nate
-
98 firebird, black, flowmaster dual exhaust with 4 1/2 inch diameter chrome tips, 17X10 boyd coddington smoothie II wheels, hurst shifter, whisper induction lid. -
The tach wire is easiest to get to on the passenger side floorboard. There is a connector which has a white wire that is the tach wire....I will post the other colored wires in the connector tonight when I get home to look at my service manual.<a href=\"http://www.onid.orst.edu/~waltejam/\" target=\"_blank\">98 Bright Red Camaro</a><br />Too many mods to list....check my website -
So basically, it's the white wire under the passenger side panel for RPM?
Anyone else with a comment - PLEASE!
Thanks
Nate98 firebird, black, flowmaster dual exhaust with 4 1/2 inch diameter chrome tips, 17X10 boyd coddington smoothie II wheels, hurst shifter, whisper induction lid.Comment
-
speedy-v6-camaro's wire sounds easier to get to then where i installed it. i installed a tach with the shift light, and ran the tach wire to the ignition control module, pin E. this wire was pretty hard to get to, so i say try speedy's first. by the way speedy, where'd u connect the ground to? i have it near the gas pedal and sometimes for wahtever reason it seems as the ground is not making good connection because the needle will freeze for just a moment (even though the shift light is always dead on).
Comment
Comment