Tweet
ok so does anyone know about how hard it is to replace the freeze plun in a 3.4l block because i have no idea as to where to start if u can help by telling me how to go about it thanks
-
-
Re: trouble with the car
This isn't a n00b procedure. I'm pretty sure there are 4 freeze plugs, which one blew out? And how did it blow out in the summer? Is your car stored in a meat locker? New freeze plugs just need to be tapped in with a mallet and a wooden dowl. Make sure its put in straight and even.<a href=\"http://www.fullthrottlev6.com\" target=\"_blank\">www.fullthrottlev6.com</a><br /><a href=\"http://www.chitownracing.com\" target=\"_blank\">www.chitownracing.com</a> -
Re: trouble with the car
there are more than 4. there are two i believe that are very hard to get to, the shop i took it to had to take the tranny out to get to two of them, the others on the side are very easy to get toComment
-
I’m new. I actually don’t own a Camaro or firebird. I do have a 2000 Camaro 3.8 fly by throttle and 4l60e. This is installed in a 1980 Triumph TR7...1 day ago -
Not much going on, replaced my Kenwood double din stereo with a Pioneer double din, the Kenwood had problems. Then replaced my power inverter for my reverse...4 days ago -
Hi all new to the community here. I have a 2014 RS 6 speed manual... and so about a year ago my tail lights got cracked and eventually the plastic housing...2 weeks ago -
Hi, everyone. We bought a 97 base model convertible Camaro and someone broke the motor ... Lights were blinking on the dash and that someone ignored the...3 weeks ago
Comment