Tweet
my oil pan gasket is leaking onto my ypipe. do you really have to lift the engine to change it. is this a common problem with these cars and how soon should it be fixed. it will leave a drip on the garage floor overnite.
-
1998 Onyx Black Camaro A4 2.75\" Custom Flomaster Catback, Removed Cat, MTI Lid, Jet Power Programmer, K&N air filter, 1LE aluminum driveshaft, maf screen removed. -
Is it a pan gasket or rear main seal. My car's rear main is due for a fixing, again. The 3.8 doesn't like its rear seals. I have no idea what it costs, but oil is cheap yet.1995 Firebird 3.8 A4, 140,000 miles and going strong<br />Basically Stock, college=poor <p>Junior Mechanical Engineering Student: Milwaukee School of Engineering; Cpl, MN Army National Guard...just got promoted :) -
Wow! I had the same thing in 2000.
The dealer tightened them without lifting the motor. Some bolt heads looked like very tight access though. I can not say for sure whether or not they got them all, but the leak stopped.--Traded In--<br />1998 Navy Blue Metallic Camaro (RS)<br />3.8L V6 w/4L60E Auto<br />Sport Appearance Package<br />T-Tops - Loaded<br />_ _ _ _ __________________ _ _ _ _ <br /><br />--New--<br />2003 Victory Red S10 Xtreme w/Silver Stripes<br />2.2 L4 w/MW2 5 Speed Manual<br />LS PackageComment
-
Hey everyone! I've been trying to remove my transmission for two days now! I need to replace the clutch. Only thing I've got left holding the transmission...2 weeks ago -
Hello, so I changed the front bearings on the bird and the ABS inoperative light came on. I made a mistake of not removing negative battery cable. Now...3 weeks ago -
I usually have to double, triple my headlight switch for them to come up on my 97 Firebird. I cleaned all connections. Could it be the headlight switch...3 weeks ago
Comment