Water Temp Gauge - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

Water Temp Gauge

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Water Temp Gauge

    I HAVE A 99 FIREBIRD WITH A 3.8 ENGINE. AFTER THE
    CAR HAS RUN FOR AWHILE THE GAUGE TEMPERATURE GOES TO 210 F. THE GAUGE TEMPERATURE DOESN'T VARY EITHER WAY FROM 210 F. TILL AFTER THE CAR HAS SET FOR AWHILE. I HAVE REPLACED THE TEMPERATURE SENSOR TWICE WITH NO CHANGE.WHEN I STICK A TEMPERATURE PROBE IN THE RADIATOR IT READS 20 TO 30 DEGREES COOLER THAN THE 210 F ON THE GAUGE. i HAVE NO PROBLEM ORDERING A NEW GAUGE IF THATS THE PROBLEM. CAN YOU HELP ME TROUBLING SHOOTING THIS PROBLEM? THANK YOU MUCH
    1999 Firebird 3.8 Chamelon<br /><br />MagnaFlow Catback<br /><br />Devon

  • #2
    http://www.barryboys.co.uk/photos2/Caps_Lock2.JPG


    What exactly is the problem? 210° on the gauge is about normal for a stock thermostat. The temp gauge is also pretty inaccurate...hook it to a scan tool to read the actual temperature.

    Originally posted by therock:
    WHEN I STICK A TEMPERATURE PROBE IN THE RADIATOR IT READS 20 TO 30 DEGREES COOLER THAN THE 210 F ON THE GAUGE.
    The coolant is supposed to be colder after going through the radiator...that's why it's there.

    [ January 10, 2006, 07:18 PM: Message edited by: 98Camaro3.8 ]
    Matt
    1998 Mystic Teal Camaro M5
    Whisper Lid, Pacesetter Headers, Catco Cat, Dynomax Super Turbo, B&M Shifter, BMR STB, LSD, P&P Intakes, GT2 Cam, Comp OE Lifters, 1.7 Roller Rockers, Pushrods, SSM Heads, DHP PowrTuner.

    Comment


    • #3
      I understand its going to be colder but not by some 30-50 degrees and also i forgot to mention before my fans werent coming on. I figured it out because my hoses kept on popping off but my gauge was reading 210. So i let it sit started in the driveway one day for about 15 mins. When i came out the radiator was bowling over, and the overflow tank was hissing but the gauge was still reading right on 210 so i know it was way off. So i am wondering is there a module that goes with are gauges that runs to the pcm ive been reading up but theres not much info????
      1999 Firebird 3.8 Chamelon<br /><br />MagnaFlow Catback<br /><br />Devon

      Comment


      • #4
        Mine stays around 160 (or 180... whatever the first number after the first line is)... it occasionally will rise and fall in traffic on hot days, and it would really heat up in hard turns before I figures out I was low on coolant, but 210 is abnormally hot for me.

        Also, mine doesn't stay still like that, it almost constantly changes sometimes.
        1998 Firebird<br />V6 M5<br /> <a href=\"http://www.cardomain.com/ride/2239301/1\" target=\"_blank\">http://www.cardomain.com/ride/2239301/1</a>

        Comment


        • #5
          Originally posted by J. Henley 17:
          Mine stays around 160 (or 180... whatever the first number after the first line is)... it occasionally will rise and fall in traffic on hot days, and it would really heat up in hard turns before I figures out I was low on coolant, but 210 is abnormally hot for me.

          Also, mine doesn't stay still like that, it almost constantly changes sometimes.
          That's normal too. These water temp gauges are horribly inaccurate. What's normal for one person's car is different from others'.

          Originally posted by therock:
          I understand its going to be colder but not by some 30-50 degrees
          So is it 20° or is it 50°? Little bit of a difference there. ;)

          If it's that much colder, it still sounds like it's running normally depending on your thermostat and the accuracy of the gauge.

          Originally posted by therock:
          and also i forgot to mention before my fans werent coming on.
          Cooling fans shouldn't turn on until 221° or when the A/C is on.

          Originally posted by therock:
          I figured it out because my hoses kept on popping off but my gauge was reading 210. So i let it sit started in the driveway one day for about 15 mins. When i came out the radiator was bowling over, and the overflow tank was hissing but the gauge was still reading right on 210 so i know it was way off.
          Here it sounds like it's overheating, but you say it's up to 50° colder than 210°...which means it's running right where it's supposed to.

          It may do that if you leave the cap off. The whole system is supposed to be under pressure. With the cap off, the boiling point will be much lower, and the fluid could expand to the point that it overflows out of the cap opening.


          Get the gauge out of the equation. Hook it up to a scan tool and see what the temp really is. If that's out of whack also, then you know the problem isn't the gauge.
          Matt
          1998 Mystic Teal Camaro M5
          Whisper Lid, Pacesetter Headers, Catco Cat, Dynomax Super Turbo, B&M Shifter, BMR STB, LSD, P&P Intakes, GT2 Cam, Comp OE Lifters, 1.7 Roller Rockers, Pushrods, SSM Heads, DHP PowrTuner.

          Comment


          • #6
            Thanks 98 camaro for your input and advice ill try the scan tool as soon as i can. But when the water was boiling over the cap was on and we let the car cool down and the water was reading 245 after having 5 mins to cool down. So this is when i figured something was way wrong. First if it was that hot why werent the fans coming on? Why wasnt the gauge reading up to there? Something has to be tied into this i have mad a manual fan switch for know and the hoses have stayed on so far. But the car still reads the same temp 210 with the fans on high. But i check the water and it reads usally 160-165. Im sorry f this is confusing its really hard to write the prob becuase i just dont know what really is the prob is it the computer the gauge the wiring ???? Who knows
            1999 Firebird 3.8 Chamelon<br /><br />MagnaFlow Catback<br /><br />Devon

            Comment

            Latest Topics

            Collapse

            • Andy H
              Transmission removal help!!
              by Andy H
              Hey everyone! I've been trying to remove my transmission for two days now! I need to replace the clutch. Only thing I've got left holding the transmission...
              2 weeks ago
            • 2.8 Bird
              Abs inop
              by 2.8 Bird
              Hello, so I changed the front bearings on the bird and the ABS inoperative light came on. I made a mistake of not removing negative battery cable. Now...
              3 weeks ago
            • fishin
              Intermittent Headlight Function 97 Firebird
              by fishin
              I usually have to double, triple my headlight switch for them to come up on my 97 Firebird. I cleaned all connections. Could it be the headlight switch...
              3 weeks ago

            FORUM SPONSORS

            Collapse
            Working...
            X