Welcome to the FirebirdV6.com/CamaroV6.com forums.
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact contact us.
If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
the car runs fine the only problem is a oil leak that she will get after driving for a while. and the leak is only a quater size amount of oil. sometimes more.
so i don't have any plans to fix it any time soon. i was just thinking about it
now that the piece that is missing attached to the crankshaft itself or is it s little piece that isn't there?
When you have your leak, Does it get on the front of the balancer or does it get on the back where the crank triggers and miss fire timers are? Fixing the leak could be as simple as putting silicone on the damper bolt and washer.
If your keyway is missing, the balancer is going to spin differently/slip on the crank. Did I read right that you have replaced the seal and that didn't fix the leak? as that sounds like what it is to me. -- Also check your balancer hub to make sure there's no burrs or damage on the hub (aka "snout") -- anything that might damage the seal or keep it from sealing.
If your keyway is missing, the balancer is going to spin differently/slip on the crank. Did I read right that you have replaced the seal and that didn't fix the leak? as that sounds like what it is to me. -- Also check your balancer hub to make sure there's no burrs or damage on the hub (aka "snout") -- anything that might damage the seal or keep it from sealing.
hey jenn, do you have a stock balancer, and keyway laying around. let me know. i'll pick them up.
who ever had the car before me(over 5 years ago) f'ed up the balancer. it looks like i have 3 freaking key ways lol. so that's probably the problem.
Hey everyone! I've been trying to remove my transmission for two days now! I need to replace the clutch. Only thing I've got left holding the transmission...
Hello, so I changed the front bearings on the bird and the ABS inoperative light came on. I made a mistake of not removing negative battery cable. Now...
I usually have to double, triple my headlight switch for them to come up on my 97 Firebird. I cleaned all connections. Could it be the headlight switch...
3 weeks ago
FORUM SPONSORS
Collapse
Working...
X
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Tweet
I mean... you're "the chick who sprays", right? :eek:
Comment