Welcome to the FirebirdV6.com/CamaroV6.com forums.
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact contact us.
If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
so Turbohead, did you get the GSS340 fuel pump from APE? Can you show me the one I need from there??? You bought the wiring and stuff seperately from there?
Go to http://www.autoperformanceengineering.com and click on "Applications". Scroll down and find where it says "LT1 owners, Read This". Click where it says "Read This" then scroll down the next page. Click "Buy LT1 Kit." It includes the pump, wiring harness, tubing, foam sleeve, etc. I think it was like 118 bucks and some change. That's all you need.
Since you've got the time to do it right, I would get a better-than-stock pump. When mine went out, I would have, except I was stranded far from home. My stocker just died w/o warning.
Yea, I think I'm going to go ahead and go with a performance Walbro pump from APE. It seems like it might last longer and is a better value, than a stock pump.
I got my walbro 255's off of ebay for like $110 shipped. So far it's been through running 10 psi with a powerdyne supercharger for about 3 years. Now been running a nitrous wet shot for almost 2 years and the walbro still working like a champ. So thats about 5-6 years now and no problems. Also for mine it was just plug and play for the wiring. I ditched the bucket and used hose clamps to attach it on. I highly suggest doing the cutting for the hatch for the trap door method. Best way to do it. I know I had the hose come off after I put mine in and it took maybe 15 mins to pull it back out and reconnect the hose. Now I just have a cover made of deadmat and it is just taped over where I cut so if I have to get back in there I just move the tape and cover.
08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine
Oh, cool, so all I need to do is just change the pump and not the whole assembly right? And by the way, thanks Turbohead, you're helpin me out alot.
Exactly. As said, wiring is plug and play. That LT1 kit comes with tubing and wiring as well. For 118 bucks, I don't think that can really be beat. That's the best deal I found. It's a high pressure, 255lph pump. If that's the route you go, be sure to use the plastic flex tube for the fuel line. The rubber hose crimps up.
Does the plastic flex tube come with the kit? Also all I would need is the kit for it to simply plug and play correct?
Yes. Everything needed except for some sort of glue to reassemble the bucket is there in that kit, though we used zip ties. :D The only thing we had to worry about was making sure they didn't get in the way of the float for the fuel level sender. Yes. It is plug and play. I'd recommend doing the access panel method to get to the pump.
Yea, I know the trap door is the easiest, but I just can't bring myself to tearing up my car.lol.
It's covered my insulation and carpet anyways. Besides, it will save you 5h!t tons of trouble and time. Remember that one important rule of auto mechanics: No matter how prepared you are for anything, something is going to happen that you weren't expecting and aren't prepared for.
If you don't like the idea of using a dremel, get yourself a pair of those sheet metal scissors. The name escapes me, atm. That's what we used.
Hey everyone! I've been trying to remove my transmission for two days now! I need to replace the clutch. Only thing I've got left holding the transmission...
Hello, so I changed the front bearings on the bird and the ABS inoperative light came on. I made a mistake of not removing negative battery cable. Now...
I usually have to double, triple my headlight switch for them to come up on my 97 Firebird. I cleaned all connections. Could it be the headlight switch...
3 weeks ago
FORUM SPONSORS
Collapse
Working...
X
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Comment