Car Won't Hold Idle (loses top end too) - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

Car Won't Hold Idle (loses top end too)

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Car Won't Hold Idle (loses top end too)

    Sometimes when I start my car, it fires/cathces, then just sputters right back out. It is like the car won't hold idle. If I hold down the gas to give it some RPM's, its fine. Once I put it into first gear and drive a bit, or rev it to like 5000rpm, the problem is solved and it will hold RPM's again when I press the clutch in.

    This will happen for about 3-5 days, then go away for a few weeks, then come back, etc.

    As well, when this is happening, my engine runs fine (at 100%) right up until about 4500rpm when it just loses all power, it still runs fine, doesn't misfire, or anything, it is as if the engine just limits power to the engine.

    No SES lights either.

    Please Help!

    (and I searched but couldn't find any answers)
    1996 Camaro Y87 5-Speed<br />K&N filter<br />15.19 @ 89.84

  • #2
    Tuneup, seafoam, air filter, etc.
    I don't have any other suggestions.
    sigpic

    Comment


    • #3
      I think it might be my fuel injector?
      1996 Camaro Y87 5-Speed<br />K&N filter<br />15.19 @ 89.84

      Comment


      • #4
        Also, what is the little black box that is attached to a bracket behind the alternator. It sits right off the left cylinder bank? It has a small air hose running to the intake, a larger hose running somewhere else and a wire harness. They all plug in on one side, but the box goes nowhere.
        1996 Camaro Y87 5-Speed<br />K&N filter<br />15.19 @ 89.84

        Comment


        • #5
          Originally posted by MikeV6:
          Also, what is the little black box that is attached to a bracket behind the alternator. It sits right off the left cylinder bank? It has a small air hose running to the intake, a larger hose running somewhere else and a wire harness. They all plug in on one side, but the box goes nowhere.
          That's the EVAP purge solenoid. Controls when the EVAP system purges into the intake manifold.
          Matt
          1998 Mystic Teal Camaro M5
          Whisper Lid, Pacesetter Headers, Catco Cat, Dynomax Super Turbo, B&M Shifter, BMR STB, LSD, P&P Intakes, GT2 Cam, Comp OE Lifters, 1.7 Roller Rockers, Pushrods, SSM Heads, DHP PowrTuner.

          Comment


          • #6
            when, my bracket is broken and one of the hoses was lose, could that cause this problem?
            1996 Camaro Y87 5-Speed<br />K&N filter<br />15.19 @ 89.84

            Comment

            Latest Topics

            Collapse

            There are no results that meet this criteria.

            FORUM SPONSORS

            Collapse
            Working...
            X