I had my car going 2 weeks ago after being stored all winter and it started fine. I had to put new valve cover gaskets on and re set my rockers. Tried starting it over the weekend and only clicks. Won't roll over. I checked all the grounds, battery, firing order. I wonder what else could it be?
Announcement
Collapse
No announcement yet.
Car won't start? Just clicking
Collapse
X
-
Check the connections on the starter. I had two different cars with the same problem. It acted like a weak battery. After checking the battery and even trying to jump the battery I found the problem. It was the large cable on the starter. It was lose. You will have to get under the car to check it.
Hope it helpsDr Todd
-
Sounds like a poor electical connection somewhere.
-Check Battery
-Check battery connections for tightness
-Check battery posts for corrosion buildup
(sometimes corrosion buildup can occur on the
cables themselves hidden by the cable insulation)
-Check all fuses ... in dash and under hood.
-Check starter connection
If all of that checks out as good then you may have a problem with your ignition shwitch or something could be wrong with the anti-theft stuff (maybe your key is fouled).
If all of those things are in OK then it should at least turn over.
Comment
-
is it a 9696 Camaro 3.8 A4 Basemodel: 8 mm wires, Shift Kit, Hollowed <br />Cat(o2 sims), RKSport exhaust, IAT 5.6K resistor, Home Depot CAI<br />>>>15.375 @ 89.27<<<NEW BEST TIME <a href=\"http://www.cardomain.com/memberpage/552491\" target=\"_blank\">http://www.cardomain.com/memberpage/552491</a>
Comment
Latest Topics
Collapse
-
by ssms5411So my truck is finally getting some work done, after 17 years, Oil pressure sensor went out and it’s located under the lower intake manifold. Have to...8 hours ago
-
Hey guys. For starters I’ve always been a big car guy, I love all types of cars and can appreciate all types of engineering. I’ve always been a Chevy...2 weeks ago
-
by ssms5411Getting a message saying invalid interface, haven’t used it since last year probably November. First time in 23 years I had a problem. Going to get...2 weeks ago
-
need help finding a balancer and a replacement balancer bolt. im at a lost after confusing myself researching.3 weeks ago
Comment