First off, I just want to say thanks to all those who helped me decide to get this program, especially 95Batmobile. Thsi might come as a shock to some of you, but the HP & torque gains are as advertised! After install you could really feel the power. But torque is what you feel right, let's talk about horsepower. The speedo moves very quickly; much quicker than it did before. It really is like driving a new car. The main thing that impressed me was how smooth the powerband was. Before the torque would peak about 4000RPMs and you could tell without even looking @ the tach you were there. Now it's just a steady climb to about 5200RPMs, then it runs out of juice. The chip also fixed my lean misfire problem when the engine is cold. It also fixed my IAC valve problem which was making the car hard to stop because the engine would not idle down correctly. The fans come on @ 220 degrees. The speed limiter is removed. I can now fishtail the car on drypavement from a stoplight even with those huge rear tires! Bottom line, get this chip!
Announcement
Collapse
No announcement yet.
Fastchip installed. Look here!!!!!
Collapse
X
-
Fastchip installed. Look here!!!!!
1993 Pontiac Firebird 3.4L V6 A4<br />F41 RPO suspension option<br />119K miles<br />Fastchip<br />K&N \"Filtercharged\"<br />Airbox cuttout CAI<br />ASP underdrive pulleys<br />Pacesetter Headers<br />Flowmaster 80 Series 2.75 cat-back<br />MangaFlow Hi-Flow Cat<br />Corvette Servo<br />16.4 @ 81 MPHTags: None
-
<blockquote>quote:</font><hr>Originally posted by BradC:
It also fixed my IAC valve problem which was making the car hard to stop because the engine would not idle down correctly. <hr></blockquote>
what was wrong with the car in the above respect? please explain... also where did u get the chip/how much... and do u have to run higher octane now?
thanks
ian
[ January 21, 2004: Message edited by: ianwells100 ]</p>97 camaro<br />black, 5 speed, t-tops, rockford fosgate cd w/4X6.5\" rockford speakers, 3\" flowmaster american thunder catback with 3\" carsound cat, SLP CAI, B&M Ripper w/leather Hurst shift knob, 5% tint.<br /> <a href=\"http://camaroz28.cardomain.com/id/ianwells100\" target=\"_blank\">http://camaroz28.cardomain.com/id/ianwells100</a>
Comment
-
where did u get it and how much did it cost. do they make it for a 94 automatic?blue 94 firebird<br />flows, ram air, more to come<br /><a href=\"http://www.cardomain.com/id/bluefbird\" target=\"_blank\">http://www.cardomain.com/id/bluefbird</a>
Comment
-
www.fastchips.com , or is it www.fastchip.com .. well its one of thoes-Aaron, AKA ATL2001<br />93 3.4L <br /><a href=\"http://www.ilfba.com\" target=\"_blank\">www.ilfba.com</a>
Comment
-
Congrats, glad you are as happy with yours as I am with mine! :D<b><a href=\"http://members.cox.net/95batmobile/d86f.jpg\" target=\"_blank\">Sinister Six©</b></a><br /><a href=\"http://www.sounddomain.com/id/95batmobile\" target=\"_blank\">My \'95 Bird</a><br />I am not afraid of storms, for I am learning how to sail my ship.
Comment
-
i just emailed them to make some for 3.8 v6s so im waiting for a reply. keep your fingers crossed guys. not limiter and more power what more could you ask for. ;)96 Camaro 3.8 A4 Basemodel: 8 mm wires, Shift Kit, Hollowed <br />Cat(o2 sims), RKSport exhaust, IAT 5.6K resistor, Home Depot CAI<br />>>>15.375 @ 89.27<<<NEW BEST TIME <a href=\"http://www.cardomain.com/memberpage/552491\" target=\"_blank\">http://www.cardomain.com/memberpage/552491</a>
Comment
-
Everyone keep in mind that this chip is good for engines that are not heavily modified, but only have the simple bolt-ons like exhuast and intake work. When I spoke with the people at Fastchips, they said that the computer work that the do would not work well with a 3.4L V6 that had heads and cam work done.
Otherwise, if the engine is basically stock internally, go for it!- Josh<br />If you have any questions or need installation pics/help, e-mail me: Viper98885@aol.com<br /><a href=\"http://Camaroz28.cardomain.com/id/viper98885\" target=\"_blank\">\'93 Camaro Hardtop</a><br /><a href=\"http://Camaroz28.cardomain.com/id/01lincolnls8\" target=\"_blank\">\'01 Lincoln LS8 Sport</a><br />\'00 Yamaha YZF-R6<br /><a href=\"http://www.ftpp.net\" target=\"_blank\">Full Throttle Performance</a>
Comment
-
hmmm i cant stop swayin back and forth :( :D\'93 Red 3.4L Camaro<br />Engine: Jet II, Pacesetters, K&N FIPK, Accel Wires, Iridium Plugs, Flowmaster, ASP U/D, 180 Thermo, much more...<br /><br />\'98 Z28 Vert Triple Black A4 Stock for now<br />34000 Miles<br /><br />Not enough room in the sig for my stereo.
Comment
-
For newer cars I'd recommend MAFT+ and a HPP3, expensive but you cover all the bases open to us currently.00\' firebird v6 5spd<br />201rwhp ---- 230 rwtq<br />\"Everyday I grow stronger...and further from you.\"<br />WARNING: Do not take any of my comments seriously unless they are technical in nature and then only at your own risk
Comment
Latest Topics
Collapse
-
by ssms5411So went out to start the Camaro and no start, batteries are good just hear a thud sound, started up fine last Friday. Check the fuses and the battery...1 day ago
-
Working on getting my 99 Camaro back in action. Long story short, got parked in the garage about 5 years ago (kids, career stuff ect.) trying to get her...1 day ago
-
by AZ3.8CamaroI have a 15 year boy now (crazy how time flies from when I was a teenager on here!) and his first car will be the old Camaro.
I stopped driving...3 days ago -
Well, I finally am getting some time to get back into these cars. Today I installed a set of no name eBay stainless headers that I’ve had for probably...1 week ago
-
by KubesI notice a lot of headlight assemblies on amazon for 1998-2002 but zero for 1997. Am I to assume it’s not possible to upgrade from my 4 rusted out light...1 week ago
Comment