blinkers

[michael]

when i make a turn i turn my blinkers on, they flash, then when i hit the brake, they go solid and dont blink. when i let off teh break they start flashing again, if i have my lights all the way on at night they wont even blink, my aarow on my dash stays solid, this just started happening, what could i do to fix this....

[JediBandit]

Sounds like you just need to replace your blinker fluid. It is like $1.00/gal at Napa. It should be by the windshield washer fluid.

[SuprSpdDB7]

Check ur brake lights. cuz this happened to my dad on his truck when his brake lights were out (and he pressed the brakes) his turning signals would stop blinking.

[GrdLock]

<blockquote>quote:</font><hr>Originally posted by JediBandit:
Sounds like you just need to replace your blinker fluid. It is like $1.00/gal at Napa. It should be by the windshield washer fluid.<hr></blockquote>

There's blinker fluid?? lol, who knew!

[zccop2001]

<blockquote>quote:</font><hr>
Sounds like you just need to replace your blinker fluid. It is like $1.00/gal at Napa. It should be by the windshield washer fluid.<hr></blockquote>


i think my IQ just droped. wheres my car's ginseng port?

[GregWS6'01]

BLINKER FLUID!!!!!!! HAHAHAHAH you guys are funny

[JediBandit]

;) Well hell, while you are at it, you'd better climb under your car and check your muffler bearings. They usually go out about the same time as your blinker fluid.


But seriously, as far as your turn signals, if it isn't the blinker fluid, then checking your brake lights is the next step, if they are all working properly, check your fuses. After that, you may have a flasher that is going/gone. Good luck and let us know.

[img]graemlins/burnout.gif[/img]