I'm sure most of you have seen this before. I just ran across an ad for Pulstar spark plugs and was about to dismiss it as BS when I looked at the bottom and guess what? They've got something that puts them ahead of any other BS-sounding product, dyno sheets! I was impressed. They're reporting an increase of 11 hp on a stock 350z (you paying attention kala?). That's pretty rediculous.
Now'd I'd be afraid this "bigger spark" or whatever is going to screw up something. So I did some research and basically still don't know what gap size would be appropriate. The sites faq is pretty unhelpful: "A: If your vehicle manual calls for a gap less than .040" then use the factory recommended settings. Under no circumstance set the gap to greater the .040" regardless of the manual setting." I think I'm supposed to be gapped at .060? It also pretty much says not to use them with FI or nitrous unless you know what you're doing.
interesting.
Now'd I'd be afraid this "bigger spark" or whatever is going to screw up something. So I did some research and basically still don't know what gap size would be appropriate. The sites faq is pretty unhelpful: "A: If your vehicle manual calls for a gap less than .040" then use the factory recommended settings. Under no circumstance set the gap to greater the .040" regardless of the manual setting." I think I'm supposed to be gapped at .060? It also pretty much says not to use them with FI or nitrous unless you know what you're doing.
interesting.
Comment