Tweet
the little plastic clip thats supposed to hold the blades on the driver side low beam light is in all the way and yet the blades keep backing out allowing the connector to disconnect and fall away. any ideas
thanx in advance
thanx in advance
-
<a href=\"http://cardomain.com/id/fantomfreke\" target=\"_blank\">http://cardomain.com/id/fantomfreke</a> <br />** Bad American **<br /><br />*2000 F150 4x4 off road*<br /><a href=\"http://cardomain.com/id/fantomfrekesford\" target=\"_blank\">http://cardomain.com/id/fantomfrekesford</a> -
just put a dab of household silicone glue on the end of the connector and push it back together.. that will hold it, but when you do ever have to swap the bulb it should come apart with a little extra force.. just don't go nuts with it..
if you have some rtv lying around that should work too.. like I said just use a dab or 2..
[ March 18, 2003: Message edited by: black98V6 ]</p>-Brad
98 Firebird - gone from mod mode to keep it running and useable mode.
2000 V-Star Custom 1100
If all else fails use a bigger hammer!
:rock: -
ill give it a shot, apreciate it<a href=\"http://cardomain.com/id/fantomfreke\" target=\"_blank\">http://cardomain.com/id/fantomfreke</a> <br />** Bad American **<br /><br />*2000 F150 4x4 off road*<br /><a href=\"http://cardomain.com/id/fantomfrekesford\" target=\"_blank\">http://cardomain.com/id/fantomfrekesford</a>Comment
-
Hey everyone! I've been trying to remove my transmission for two days now! I need to replace the clutch. Only thing I've got left holding the transmission...2 weeks ago -
Hello, so I changed the front bearings on the bird and the ABS inoperative light came on. I made a mistake of not removing negative battery cable. Now...3 weeks ago -
I usually have to double, triple my headlight switch for them to come up on my 97 Firebird. I cleaned all connections. Could it be the headlight switch...3 weeks ago
Comment