well F&%# me.... - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

well F&%# me....

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Re: well F&%# me....

    Sounds like a coil pack or a bad wire to me, not a bad spark plug.

    Comment


    • #17
      Re: well F&%# me....

      swivel for the sockets ftw
      WAWA-A-HOLIC

      Comment


      • #18
        Re: well F&%# me....

        Originally posted by kristen View Post
        swivel for the sockets ftw
        EXACTLY

        if you have the right tools for the job, it is easy

        go out and spend the extra $20 for the right tools and you wont have to sit there for 5 useless hours trying to do something

        Comment


        • #19
          Re: well F&%# me....

          plus i'm a chick with skinny arms
          WAWA-A-HOLIC

          Comment


          • #20
            Re: well F&%# me....

            your misfire may not be just solely caused by the spark plug; you could have a singed wire or bad coilpack too

            Comment


            • #21
              Re: well F&%# me....

              Originally posted by kristen View Post
              plus i'm a chick with skinny arms
              your not kidding.


              i can't tell u how many times i wish my arms/hands were smaller than they are.

              skinny arms ftw.

              Comment


              • #22
                Re: well F&%# me....

                I agree! I did it my first time about a year ago, and it was pretty simple. It wasn't as easy as doing... lets say an Elantra with all the plugs right on top, but it wasn't hard at all.


                Originally posted by cam98aro View Post
                not really

                i did mine in about an hour, it was the first time did it on the car.. it wasnt as hard as everybody makes it out to be IMO
                2000 Camaro 3.8 <a href=\"http://www.cardomain.com/ride/2040383\" target=\"_blank\">http://www.cardomain.com/ride/2040383</a>

                Comment


                • #23
                  Re: well F&amp;%# me....

                  thats the thing about the v6 3.8's.... they go through coil packs so fast. Those engines are pretty hard to work on, even just changing the plugs out because theres no room, now I don't know about them with mods cuz when I had a v6, it was stock. but those engines are a byatch. thats why i got an ls1. :) good luck
                  #1:1999 pewter metallic y87 rs A4 camaro.check out the pics on the link below<br />#2:Bright red 1979 Pontiac Trans Am. Brand new 400 cubic inch Pontiac Motor. All work done by me, except the engine work.<br /> <a href=\"http://www.cardomain.com/ride/2216133\" target=\"_blank\">http://www.cardomain.com/ride/2216133</a>

                  Comment


                  • #24
                    Re: well F&amp;%# me....

                    so basically after talking to a whole load of people the general consenise was dont even F with it if you have the stock headers. so i was like "well its a pain in the arse to do plugs or wires with the stock headers and i have headers on order should be here in a day or two. it might be the ignition coil." so after a few burns and some beat up knuckles and one socket which i droped which i dont think ill ever see again lol.....new coil went in fixed the probelm dead on....runs like the champ shes aways been :banana:

                    Comment

                    Latest Topics

                    Collapse

                    There are no results that meet this criteria.

                    FORUM SPONSORS

                    Collapse
                    Working...
                    X