Tweet
yesterday all of a sudden after pulling away from a light my car started shaking pretty hard under heavy load. today it still does it but the ses light just turned on. before anyone says plugs/wires I put them in about a year and a half ago along with a new cat. I don't take the car to the track and don't drive it that hard. could it be a bad sensor ie: O2, maf,map etc. I also put a slp cai in last week, could that possibly have screwed up the air/fuel ratio. I am sure someone already posted a question just like this but i am leaving for work and don't have time to search.
-
-
it sounds like a coil. same thing happend to my car. take it to a place that has a diognostic computer to see which cilender has the missfire. -
definitely a jacked up coil, i had the same problem and i threw a new coil on and worked like newComment
-
don't rule out the possibility of plugs or wires. Best thing to do is get the code read and see what it says. If it is multiple cylinder misfires, then u r looking at a coil pack or the ignition module, or simple more plugs n wiresStephen Cruikshank<br /><br />Selling some stuff so all I have left is the FRA, !MAF Screen, whisper lid, Holley PowerShot, 3\" catback, and 160* thermo on the car<br /><br />I Practice Street S.M.A.R.T.S. - do you?Comment
-
Hey everyone! I've been trying to remove my transmission for two days now! I need to replace the clutch. Only thing I've got left holding the transmission...2 weeks ago -
Hello, so I changed the front bearings on the bird and the ABS inoperative light came on. I made a mistake of not removing negative battery cable. Now...3 weeks ago -
I usually have to double, triple my headlight switch for them to come up on my 97 Firebird. I cleaned all connections. Could it be the headlight switch...3 weeks ago
Comment