Idle rpm flucates after startup - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

Idle rpm flucates after startup

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Idle rpm flucates after startup

    Would anyone know why my 3.8L 02 camaro's rpm would flucate up and down after starting the engine?

    After about 10seconds it smooths out to normal with no other flucations until the next startup.

    Nothing major, maybe only 200rpm's or so.

    Thanks for any advice.

  • #2
    Re: Idle rpm flucates after startup

    sounds fairly normal to me

    Comment


    • #3
      Re: Idle rpm flucates after startup

      Do you have an aftermarket air intake? Maybe a small vaccum leak of some kind...could be a lot of things.

      Comment


      • #4
        Re: Idle rpm flucates after startup

        Originally posted by heavycheyv09 View Post
        sounds fairly normal to me
        what he said.
        The car will also idle a littler higher when its cold

        Abbott long tubes,homemade true duals,slp ram air,whisper lid,eibach springs,kyb shocks,BMR subframe connectors, BMR LCA reloc brackets,BMR LCAs. T-top/manual converted

        Comment


        • #5
          Re: Idle rpm flucates after startup

          I do have an aftermarket airbox, could it be that sensor that attaches to the airbox? It never did fit very well.

          Comment


          • #6
            Re: Idle rpm flucates after startup

            Originally posted by aviator6369 View Post
            I do have an aftermarket airbox, could it be that sensor that attaches to the airbox? It never did fit very well.
            it is a normal thing, dont worry about it.

            Comment

            Latest Topics

            Collapse

            • Dongrossmd
              Throttle Position Sensor trouble shooting
              by Dongrossmd
              I’m new. I actually don’t own a Camaro or firebird. I do have a 2000 Camaro 3.8 fly by throttle and 4l60e. This is installed in a 1980 Triumph TR7...
              1 week ago
            • ssms5411
              New stereo
              by ssms5411
              Not much going on, replaced my Kenwood double din stereo with a Pioneer double din, the Kenwood had problems. Then replaced my power inverter for my reverse...
              2 weeks ago
            • 187shark
              Tail light issue causing problems. Please help..
              by 187shark
              Hi all new to the community here. I have a 2014 RS 6 speed manual... and so about a year ago my tail lights got cracked and eventually the plastic housing...
              4 weeks ago

            FORUM SPONSORS

            Collapse
            Working...
            X