Tweet
will the window regulator of manual door will be the same as an electronic i need the window regulator the part that has like little teeth on it the ones at the end broke and my window doesnt roll up the whole was? will a manual door one fit?
-
Last edited by michael454rs@hotmail.com; 09-05-2008, 10:53 PM. -
Re: door internals
anyoneeeeee -
Re: door internals
I assume you're replacing the whole assembly. Don't try to take it apart because that spring is really strong and can take a finger off if you're not careful.
It should fit but you'll have to punch a hole through the door panel for the crank in which case the panel will be ruined if you decide to put the electric regulator back in.Comment
-
Re: door internals
You might try the info in this link first. I had a similar problem and was able to find a solution without doing anything drastic:
http://shbox.com/1/adj_window.htmlComment
-
Re: door internals
Make sure your very careful with the regulator like dobie said. My brother replaced his in a cavalier and the thing shot through the garage window and about another 50 feet from there.
I replaced my window motor and think god I didn't have to take the regulator out.Comment
-
Re: door internals
the part that i need is the star shaped one the one that has like little teeth the ones at the end broke so that part i need. so it should be the same right for electric and manualComment
-
Re: door internals
Just call a dealer and see if the part numbers are the same...Comment
-
Re: door internals
Originally posted by J.T. View Post
i have actually been looking for this.. everytime we get a hard rain water leaks in and has blown about 3 rear drivers side speakers.. due to water damage..2001 Camaro 3.8 A4
1991 3000GT VR4
2001 Mitsubishi Eclipse GS
Comment
-
Re: door internals
ima call the dealer and ask im guessing the part i looking for should be the sameComment
-
Re: door internals
If you can post a picture of problem, it will help in finding a solution.Comment
Comment