What is this hose for? - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

What is this hose for?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • What is this hose for?

    I have a 98 3.8 with 174k miles in my Camaro. There is this little hose that connects to the passenger side of the throttle body. I'm guessing it's a vacuum hose of some sort, but I'm not entirely sure.

    The other day, the hose slid off from the throttle body and I didn't realize it. The car was borderline undrivable and the engine wanted to die. The hose is back on now and everything has been fine for a couple of weeks, but the part of the hose that connects to the throttle body is cracked and I'm worried it might fall off again. The vacuum suction holds it on there, but if it fell off once I'm guessing it could do it again.

    Since I'm not looking to put money in the car, I'm debating using a tiny amount of JB weld as some insurance to keep the hose from coming off again. If it turns out the hose is cheap and easy to replace, then maybe I'll just do that.

  • #2
    Re: What is this hose for?

    That hose goes to your evap emissons stuff on the passenger side.
    08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
    96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine

    Comment


    • #3
      Re: What is this hose for?

      a tiny hose clamp should work to keep it on, or cut the cracked part off, or just replace w/new hose.
      1978 Formula 461 in progress of being built :rock:
      2013 Ram 1500 Big Horn

      former owner of 85 bird w/ 2.8 - 3.4 - 3800 II - 5.0
      94 comero 3.4

      Comment

      Latest Topics

      Collapse

      There are no results that meet this criteria.

      FORUM SPONSORS

      Collapse
      Working...
      X