Tweet
Okay I am ready to install my electric fuel pressure gauge and thats easy but what I am trying to figure out where do the sending unit goes it has a thread on the end of it but nothing inside my engine bay fits the sending unit can someone help me out to find this part inside my engine pictures would be nice cause I am lost completely
-
-
Re: fuel pressure sending unit
You will need a adapter that goes onto the fuel rail and then the sending unit screws into the adapter. I'll see if I can get a pic. Search the nitrous section for the part# for the adapter. You'll need a tire removal tool to unsrew the pin inside the port so fuel will come out once you get all the parts to hook up the fuel pressure gauge. My Autometer Fuel gauge has been great going on 7 years with no problems,knock on wood.Last edited by ssms5411; 10-22-2008, 04:12 PM.08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine -
Re: fuel pressure sending unit
okay I just bought this will this work http://store.summitracing.com/partde...rt=SUM%2DG1710Comment
-
Re: fuel pressure sending unit
that will work if you want to splice your fuel line. Let me warn you that clamping the stock lines is a pain in the butt to get to seal.Originally posted by eric v6 View Post
A better route would be to get the brass fittings that fit the schrader valve on the fuel railComment
-
Re: fuel pressure sending unit
yeah but its already paid for now there is a little screw by the fuel lines on the drivers side is this where the adapter must goComment
-
Re: fuel pressure sending unit
you will have to cut and splice it into the line off your fuel rail. There is no screws for this. it is a nylon hose.Comment
-
Re: fuel pressure sending unit
Its better to go off the fuel rail as stated.08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engineComment
-
Re: fuel pressure sending unit
Originally posted by 97rs4life View Post
hey can you give me an exact picture of which fuel line to cut so I will know or is it just any fuel line I choose to cutComment
-
Re: fuel pressure sending unit
you have to cut the one going to your fuel railOriginally posted by eric v6 View PostComment
-
Hey everyone! I've been trying to remove my transmission for two days now! I need to replace the clutch. Only thing I've got left holding the transmission...2 weeks ago -
Hello, so I changed the front bearings on the bird and the ABS inoperative light came on. I made a mistake of not removing negative battery cable. Now...3 weeks ago -
I usually have to double, triple my headlight switch for them to come up on my 97 Firebird. I cleaned all connections. Could it be the headlight switch...3 weeks ago
Comment