Im back! And with a 94 Camaro ~ need direction! - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

Im back! And with a 94 Camaro ~ need direction!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #46
    Re: Im back! And with a 94 Camaro ~ need direction!

    Replaced ICM... Same result....
    sigpic
    98 Camaro 3.8 M5 Y87 | 99 Camaro LS1 Z28 T56

    Comment


    • #47
      Re: Im back! And with a 94 Camaro ~ need direction!

      In your Haynes manual go to page 5-5 under (DIS) (3.4 and 3800 engines) Follow steps closely, make sure your getting the proper voltage to the ICM. Illustration on pg. 5-11
      shows the coil assemblies and next to it is the ICM. Terminal A (blk/white) wire is your ground. I believe it is bolted to the front of the passenger cylinder head, check for a good connection.

      Comment

      Latest Topics

      Collapse

      • Dongrossmd
        Throttle Position Sensor trouble shooting
        by Dongrossmd
        I’m new. I actually don’t own a Camaro or firebird. I do have a 2000 Camaro 3.8 fly by throttle and 4l60e. This is installed in a 1980 Triumph TR7...
        2 weeks ago
      • ssms5411
        New stereo
        by ssms5411
        Not much going on, replaced my Kenwood double din stereo with a Pioneer double din, the Kenwood had problems. Then replaced my power inverter for my reverse...
        2 weeks ago

      FORUM SPONSORS

      Collapse
      Working...
      X