Tweet
i just bought a shorter serpentine belt so that i could bypass my a/c compressor. now, the tensioner doesn't really make much of a difference tension-wise, so i have to put this thing on without its help. any ideas of how to get this done? i have a 3.4 L, and i bought a 685k6 b/c i saw some other people had used this.
-
i\'m not an ambiturner. -
the question is y, the a/c pulls harldy any power unless the a/c clutch is engaged.
but if its a must sounds like u may need it a bit shorter if the tensioner is not putting on perssure.12.8@110.21 04 srt4, stock computer, stock fuel, stock turbo -
i wanted to do this cuz my compressor sounded like it was going to sieze any minute, and i didn't want it to happen while i was driving. i didn't want to replace the compressor, since i barely ever use my a/c and it should be getting colder anyways. i wound up trying a few different sized belts, but i couldn't find one that fit, so i brought it into my mechanic and he hooked me up with one. i think it something around 69".i\'m not an ambiturner.Comment
-
I’m new. I actually don’t own a Camaro or firebird. I do have a 2000 Camaro 3.8 fly by throttle and 4l60e. This is installed in a 1980 Triumph TR7...1 week ago -
Not much going on, replaced my Kenwood double din stereo with a Pioneer double din, the Kenwood had problems. Then replaced my power inverter for my reverse...2 weeks ago -
Hi all new to the community here. I have a 2014 RS 6 speed manual... and so about a year ago my tail lights got cracked and eventually the plastic housing...4 weeks ago
Comment