Help fan turns on at 245 - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

Help fan turns on at 245

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Help fan turns on at 245

    Hey my fan won;t kick on till 245 and then shuts off at 210 what the hell is going on i know this is not normal one more thing will a bad thermostat cause this type of problem i need to know the mechanic who rebuil my engine says it's the radiator cloggged but even then it should still turn on at 210 right not 245

    [ March 21, 2002: Message edited by: predator5100 ]</p>
    My new ride 2000 camaro, No mods yet still waiting for warranty to run out then all out heads, cam, and supercharger

  • #2
    I have a stock 1994 3.4L and my fan operates in a similar fashion. Unless the A/C is on, the fans don't turn on until near the 3/4 mark on the temp guage(235F I believe). So, as far as I am aware, that is normal for our engines.

    The thermo operation shouldn't affect the fan turn-on temp. In fact, when sitting still, i don't believe the thermo has much effect, but I could be wrong on that. Installing a manual fan switch will allow you to turn on the fan if sitting in traffic.

    Does your temp get that high when driving, or only when sitting still? Regardless of outside temp, my car operates around 195-200F when moving. If sitting still it will slowly climb to 235, and the fan turns on, quickly dropping the temp back to ~200F. If you don't want a manual fan switch, you could just turn on the A/C in traffic to activate the fans.

    Comment


    • #3
      Man, your cars operate hot. Change it out, especially if your in TX. My car operates around 170 (Houston) most of the time. It rarely rises over 220 and that includes running it at the track.
      94 Quasar Blue Z28<br /><a href=\"http://www.9t4z28.com\" target=\"_blank\">http://www.9t4z28.com</a><br /><a href=\"http://www.9t4z28.com/Dyno1.htm\" target=\"_blank\">http://www.9t4z28.com/Dyno1.htm</a>

      Comment


      • #4
        Stagenb what do i change out it seems sometimes not to even work i just changed the sensor and nothing different happened. IS there a seperate relay or something my fan does turn on if i kick onthe defrost so i know the motor is good.
        My new ride 2000 camaro, No mods yet still waiting for warranty to run out then all out heads, cam, and supercharger

        Comment


        • #5
          your temperature gauge could be off
          2000 manual blackbird with borla exhaust, slp intake, b&m shifter, plugs and wires, control arms and panhard rod<br />14.94 @93.3 mph

          Comment


          • #6
            Hey what do i do now i changed the sensor for the coolant didn't do a thing how can i tell it my guage is off ever since the rebuild i've had nothing but problems, now i'm getting backfires and crap after an hour of driving
            My new ride 2000 camaro, No mods yet still waiting for warranty to run out then all out heads, cam, and supercharger

            Comment


            • #7
              Just get a 160 thermostat and a manula fan switch.. Both are cheap and you can cntrol your temps/fan from there.
              94 Quasar Blue Z28<br /><a href=\"http://www.9t4z28.com\" target=\"_blank\">http://www.9t4z28.com</a><br /><a href=\"http://www.9t4z28.com/Dyno1.htm\" target=\"_blank\">http://www.9t4z28.com/Dyno1.htm</a>

              Comment


              • #8
                Moving to General Tech..
                Keith - Chicago<br /><a href=\"http://www.hptuners.com\" target=\"_blank\">HP Tuners - PCM Reprogramming</a><br /><a href=\"http://www.dxsoftware.com/magnus/\" target=\"_blank\">97 Firebird V6 to LS1 swap</a><br /><b>V8 9.967@132.78</b> 1.322 60\' NA Heads/Cam<br /><b>V8 10.295@128.48</b> 1.363 60\' NA Cam Only<br /><b>V8 10.987@119.31</b> 1.422 60\' NA Stock Internals<br /><b>V6 13.674@98.22</b> NA<br /><b>V6 12.394@104.91</b> N20 100HP

                Comment


                • #9
                  Hey i'm trying to avoid any mods to the electrical well fan system my worry is overheating when i'm letting it warm up or cool down
                  My new ride 2000 camaro, No mods yet still waiting for warranty to run out then all out heads, cam, and supercharger

                  Comment


                  • #10
                    If your temp problem is when you are sitting still,
                    <blockquote>quote:</font><hr> Hey i'm trying to avoid any mods to the electrical well fan system my worry is overheating when i'm letting it warm up or cool down<hr></blockquote>
                    then I don't know how much good the thermo will do. The lack of airflow over the radiator when sitting still causes the temp to jump. You could remove the thermo (not advised!) and would still probably see the temp go up. That is why the fan switch is benefitial. On-demand airflow, even when sitting still.

                    [ March 25, 2002: Message edited by: Backfire ]</p>

                    Comment


                    • #11
                      Yes at a stand still when doing nothing
                      My new ride 2000 camaro, No mods yet still waiting for warranty to run out then all out heads, cam, and supercharger

                      Comment


                      • #12
                        If your car warms up fastr then it use to your thremo may be stuck closed or the coolant isnt flowing. You should fix it as fast as you can though, because oil starts to break down at about 255 degrees.

                        Comment


                        • #13
                          Well thats good to know however the fan is electrically controlled by two sensors and should kick on when the sensor reads 210 and it doesn;t and i've reaplced both sensors
                          My new ride 2000 camaro, No mods yet still waiting for warranty to run out then all out heads, cam, and supercharger

                          Comment

                          Latest Topics

                          Collapse

                          • Andy H
                            Transmission removal help!!
                            by Andy H
                            Hey everyone! I've been trying to remove my transmission for two days now! I need to replace the clutch. Only thing I've got left holding the transmission...
                            3 weeks ago
                          • 2.8 Bird
                            Abs inop
                            by 2.8 Bird
                            Hello, so I changed the front bearings on the bird and the ABS inoperative light came on. I made a mistake of not removing negative battery cable. Now...
                            4 weeks ago

                          FORUM SPONSORS

                          Collapse
                          Working...
                          X