Anyone have trouble removing these bolts? I dont have any eletric tools so i was outside for almost an hour off and on trying to get those stupid bolts out. they wont come out. any suggestions would be appreciated. iam doing this for weight reduction.
Announcement
Collapse
No announcement yet.
rear seat belt removal in an 02 3.8.
Collapse
X
-
Re: rear seat belt removal in an 02 3.8.
I didn't have any trouble with mine when I took then out like 4 years ago. Mine is a 96' Camaro. Used a 1/2" drive on it.Last edited by ssms5411; 02-20-2009, 10:35 PM.08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine
Comment
-
Re: rear seat belt removal in an 02 3.8.
I work out 3 times a week. how come no one has an issue =( i used all my strength it wont move. it seems like all the bolts on my car are a huge pain in the ***. maybe my tools just suck.
Comment
-
Re: rear seat belt removal in an 02 3.8.
get a blow torch and torch the bolts for about 30 seconds then try em... make sure there isn't any cloth nearby, or anything underneath that could catch fire... even if its close, the metals gonna get hot enough to catch cloth etc. on fire even if the flame itself doesn't actually hit it...Rebuilding the engine... Building a custom front end... T-top conversion... Custom rear hatch..
Custom interior...
TEAM NoVa
Comment
-
Re: rear seat belt removal in an 02 3.8.
mine gave me some trouble too, and like you I'm surprised no one else's did , but once I shot em with the torch they came out like they'd been tightened yesterdayRebuilding the engine... Building a custom front end... T-top conversion... Custom rear hatch..
Custom interior...
TEAM NoVa
Comment
-
Re: rear seat belt removal in an 02 3.8.
Originally posted by T-Mill View Postget a blow torch and torch the bolts for about 30 seconds then try em... make sure there isn't any cloth nearby, or anything underneath that could catch fire... even if its close, the metals gonna get hot enough to catch cloth etc. on fire even if the flame itself doesn't actually hit it...
Comment
Latest Topics
Collapse
-
by Andy HHey everyone! I've been trying to remove my transmission for two days now! I need to replace the clutch. Only thing I've got left holding the transmission...2 weeks ago
-
by fishinI usually have to double, triple my headlight switch for them to come up on my 97 Firebird. I cleaned all connections. Could it be the headlight switch...3 weeks ago
Comment