Tweet
how hard r they to change i wanna change mine cuz i like working on my car:excited:
-
-
Re: engine mounts
they are a pita. but wouldnt need changed unless they really need to.MISC: 01 parts. Some interior, T top kit, seats etc.
http://forum.camarov6.com/showthread.php?t=95347 -
Re: engine mounts
how would u know they really need to be changed?Comment
-
Re: engine mounts
Ya know, I honestly dont know. I would imagine you would have to visually inspect them. if you see cracking, the rubber deteriorated, or the motor has ALOT of shake in the bay. They would need changed. but they arnt easy to get to. I tried pulling the motor from the top and couldnt get to the pass side one because of the AC comp. as for the driver side, I had to remove all the parts just to get my tools down there. I never got it out ,I had to pull the motor out from the bottom, then once I had it out I was able to get the ac comp off then I was able to remove the mounts.
ArcherMISC: 01 parts. Some interior, T top kit, seats etc.
http://forum.camarov6.com/showthread.php?t=95347Comment
-
Re: engine mounts
dang well my motor vibrates just a lil so i figure might as well change them before it gets worse how much would u think it would cost to replace them?Comment
-
Re: engine mounts
dont bother. too much work.1997 Camaro LS1 RS
1994 Camaro - Sold
1999 Trans am Vert - Sold
A Few Mods....Comment
-
Re: engine mounts
right on :tup:Comment
-
I’m new. I actually don’t own a Camaro or firebird. I do have a 2000 Camaro 3.8 fly by throttle and 4l60e. This is installed in a 1980 Triumph TR7...1 week ago -
Not much going on, replaced my Kenwood double din stereo with a Pioneer double din, the Kenwood had problems. Then replaced my power inverter for my reverse...1 week ago -
Hi all new to the community here. I have a 2014 RS 6 speed manual... and so about a year ago my tail lights got cracked and eventually the plastic housing...3 weeks ago
Comment