trouble locating a knock sensor connector - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

trouble locating a knock sensor connector

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • trouble locating a knock sensor connector

    Well my mechanic says I need a knock sensor, the wire, and the connector for it. Trouble is no salvage yard within 80 miles has the part I need. I know I can get one of like a 97-02 lesabre, grand prix, bonneville, etc. but none of the salvge yards here let you take the parts of yourself and none of them will sell me the whole assembly for god knows why. Autozone has the sensor I need, and I know I can splice in like 14-16g wire into it, but I can't find the special connector I need. If anyone has a picture of the part I need or better...a place to buy it all, it would be greatly appreciated. Thanks in advance.

  • #2
    Re: trouble locating a knock sensor connector

    This was already answered, a haynes manual will have wiring diagrams for the color of the wires from the PCM.

    http://forum.camarov6.com/showthread...172#post911172
    08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
    96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine

    Comment


    • #3
      Re: trouble locating a knock sensor connector

      I did post an add earlier about the knock sensor but now I'm trying to find the connector that locks on to the knock sensor. Im not tracing the wire all the way back to to the ECM, i'm just gonna splice it at the knock sensor and hook it up that way.

      Comment


      • #4
        Re: trouble locating a knock sensor connector

        also autozone has a wiring diagram for the whole ignition system on their website, I just need to know the GM part # for the connector that locks on to the knock sensor.

        Comment


        • #5
          Re: trouble locating a knock sensor connector

          Check out this website.
          http://www.rmsautoparts.com/proddeta...=PT308&cat=119

          Comment


          • #6
            Re: trouble locating a knock sensor connector

            here ya go
            2000 Camaro 3.8 v6 M5
            Flowmaster 80 series muffler, B&M ripper shifter, SLP grille

            Comment


            • #7
              Re: trouble locating a knock sensor connector

              Will both of those work for the 2000 camaro or what? they look kinda different. I know the the GM has got to be more expensive than the other one. Thanks for all the help guys.

              Comment


              • #8
                Re: trouble locating a knock sensor connector

                no the one i posted fits your car. the other one at rms will not work on your car
                edit: here is the correct one at rms
                http://www.rmsautoparts.com/proddeta...d=PT1233&cat=5
                Last edited by Andy H; 04-07-2009, 03:20 PM.
                2000 Camaro 3.8 v6 M5
                Flowmaster 80 series muffler, B&M ripper shifter, SLP grille

                Comment

                Latest Topics

                Collapse

                There are no results that meet this criteria.

                FORUM SPONSORS

                Collapse
                Working...
                X