Ive just got my used replacement wiper motor and i would like to try it out but the f*@king wiper arms WILL NOT come off....ive soaked them in PB blaster,pulled, pryed and tryed to yank the damn things off and nothing!!!! what the hell?!?!?!? any suggestions before i just say f*ck it and make the switch back to ford????
Announcement
Collapse
No announcement yet.
cant remove wiper arms.
Collapse
X
-
Re: cant remove wiper arms.
They are a B!tch but I've taken mine off about 8 times now since I put 02' arms on my 96' Camaro. Just remove the screw I think 13mm or 1/2" and then the fun part is using a big flat head screwdriver and pry on the sides of the wiper up/ down , it will start to loosen coming up the pass. side I bend the wiper arm up with the hood down and wiggle it while prying up / down where the little rubber peice is you should be able to get it enough so it will make it pop up, drivers side hood up and watch the paint and hood. I used a couple of towels so I wouldn't damage the paint or hood. But you should be able to get in their with a big flat head screwdriver to pry it up.08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine
Comment
-
Re: cant remove wiper arms.
just takes time and patience getting those off. Mine were on pretty good when I tried to take them off last fall. lol
Comment
-
Re: cant remove wiper arms.
Originally posted by 97rs4life View Postjust takes time and patience getting those off. Mine were on pretty good when I tried to take them off last fall. lol
Comment
-
Re: cant remove wiper arms.
thanks guys i got it off and the used motor works just fine now!!!!! i went and bought a 6 dollar 2 prong puller and it didnt work.....so i left the nut on there loose and beat it with a hammer.......red loc-tite sucks balls...wipers returning down when their off....for the mother****ing win!!!!!
Comment
Latest Topics
Collapse
-
Hey guys. For starters I’ve always been a big car guy, I love all types of cars and can appreciate all types of engineering. I’ve always been a Chevy...3 days ago
-
by ssms5411Getting a massage saying invalid interface, haven’t used it since last year probably November. First time in 23 years I had a problem. Going to get...5 days ago
-
need help finding a balancer and a replacement balancer bolt. im at a lost after confusing myself researching.1 week ago
-
Hello every one, ozzy here ive been looking at this page for weeks now finally joined. So my question is why is it that every turbo build forum just ends...1 week ago
Comment