radiator problem... - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

radiator problem...

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • radiator problem...

    okay i was changing my lower hose (its past due) and i took it off and hanging out of the lower radiator hole (where the lower hose attaches) was a about a foot and a half long piece of rubber.. i came to the conclusion that it is the seal between the plastic endcap and the aluminum radiator core should i


    upgrade buy a bigger radiator

    buy a stock replacement (used or new)

    take it to a radiator shop have them pop the end cap off and redo the gasket..


    i do not want to snip the rubber off and put it back together even though there are no leaks.. my luck a piece will come off and **** the water pump up or clog a water jacket in the engine.
    2001 Camaro 3.8 A4
    1991 3000GT VR4
    2001 Mitsubishi Eclipse GS


  • #2
    Re: radiator problem...

    get a new one. they are like $160 new maybe?

    https://www.radiatorbarn.com/search....oduct=radiator

    they have it for $135
    Team NoVa

    2000 Firebird- Intake, Pacesetters, !cat, full 2.5 to flowcrapster, 1.9 rockers, LS6 springs and Intense modded retainers, WS6 speedlines, T/A bumpers and hatch, 5 spd swapped, SOON TO BE nitrous'd and cammed.

    Comment


    • #3
      Re: radiator problem...

      Indeed, get a new one.
      Leonard
      www.fquick.com/96V6Junkie
      sigpic

      Comment


      • #4
        Re: radiator problem...

        i think i wanna upgrade to a bigger one i don't need it and will gain nothing.. but eh its another mod on the list lol
        2001 Camaro 3.8 A4
        1991 3000GT VR4
        2001 Mitsubishi Eclipse GS

        Comment


        • #5
          Re: radiator problem...

          I'm going with a bigger radiator to keep my temps down in the summer, when the turbo is on, I had to find a radiator install kit for $99 from summit to help hold the fans and hold the condensor, since my ALM. aftermarket doesn't have the slots on the ends to hold them like the stock one does.
          08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
          96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine

          Comment

          Latest Topics

          Collapse

          There are no results that meet this criteria.

          FORUM SPONSORS

          Collapse
          Working...
          X