What should be my next step?

[Fondle]

im not sure what else to do so far i have

-Pace setter mid length headers
-Borla xr-1
-8.5mm wire, ngk tr6 plugs
-CAI
-75 shot

what should i do next performance wise? is a throttle body spacer worth it?

[Meatyshells]

Re: What should be my next step?

that's about it unless you want to start getting into tuning engine mods, or suspension. No dont use a spacer

[Fondle]

Re: What should be my next step?

ya im going to do some suspension things soon, idk what else i can do before going f/i

i guess i could port and polish the upper and lower intakes

[pace2006]

Re: What should be my next step?

I thought you were building a turbo setup...

Before going F/I:

Bolt-ons: Gears and limited slip, aluminum driveshaft, 2.5" or 3" exhaust piping, tune, short throw, cam and internals.

Not really performance-based, but will help to distribute power.

Suspension: Shocks, springs, sway bars, moog LCA bushings, quality tires, and don't forget good brake pads.

[dgreet77]

Re: What should be my next step?

cam/heads? thats an option...

[BAD BIRD]

Re: What should be my next step?

I thought you were building a turbo setup...

Before going F/I:

Bolt-ons: Gears and limited slip, aluminum driveshaft, 2.5" or 3" exhaust piping, tune, short throw, cam and internals.

Not really performance-based, but will help to distribute power.

Suspension: Shocks, springs, sway bars, moog LCA bushings, quality tires, and don't forget good brake pads.

i so agree

[kristen]

Re: What should be my next step?

a very meaty set of tires:burn:

[Fondle]

Re: What should be my next step?

well i have 3" exhaust and a hurst short shifter with a custom stick already... i knew i was forgetting to list something

i was going turbo, but i cant get anyone to make me the y pipe from the headers to the turbo flange, and i got someone to offer me 3x as much as i paid for the turbo kit, so i think its going to end up being sold tomorrow

i totally forgot about heads and cams though, that will be my next step

[Smoke Panther]

Re: What should be my next step?

HPTuner capability

[BallerMaro13]

Re: What should be my next step?

go for full bolt-ons, whisper lid, suspension, then heads/cam.

i used to not be a believer in an upgraded suspension but it's done a world of difference for mine...i agree with Pace 100%

much work to still be done sir.

[Blizzard242]

Re: What should be my next step?

i used to not be a believer in an upgraded suspension but it's done a world of difference for mine...i agree with Pace 100%

This is what will happen to you without tires/suspension.
http://www.youtube.com/watch?v=w-de5e1-v9U
It's not fun having all that power with no way to plant it. You'd think it'd be sweet focusing on the engine but it's totally not.