New A/C - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

New A/C

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • New A/C

    My compressor is shot, so I'm buying a new A/C system right now.

    I've gotten a new compressor, but I still need to get an accumulator and everything else. I don't know exactly what I need to get, so is there a simple list of parts something can give me that I will need to replace the whole system? Thanks.

    Edit: I've got a '97 V6 A4, if that matters.

  • #2
    Re: New A/C

    I would get the check valve the line that goes into the firewall, has a sensor on it and further towards the firewall there is a check valve or might need to call it a reducer, you might need a new A/C assembly hsoe(will come with all rubber seals,Nappa $85) line depending how old yours is, accumulator is good idea(comes with seals also(nappa $30), A/C recharge kit comes with gauge to install freon 3 cans of freon with 2 ounces of oil in each can and stop leak, worked great for me, Nappa $55 need to do it on a nice dry hot day. Make sure when you install the freon you have the A/C on max so the high fans trun on, it sucks the freon in better. I just did mine like a month ago and mine is a 96' A4. It is blowing a nice 30-40 fegrees out the middle vent and thats where you check the temp reading on how cold it is blowing is always the middle vent.
    Last edited by ssms5411; 06-05-2009, 05:49 PM.
    08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
    96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engine

    Comment

    Latest Topics

    Collapse

    • Dongrossmd
      Throttle Position Sensor trouble shooting
      by Dongrossmd
      I’m new. I actually don’t own a Camaro or firebird. I do have a 2000 Camaro 3.8 fly by throttle and 4l60e. This is installed in a 1980 Triumph TR7...
      1 week ago
    • ssms5411
      New stereo
      by ssms5411
      Not much going on, replaced my Kenwood double din stereo with a Pioneer double din, the Kenwood had problems. Then replaced my power inverter for my reverse...
      2 weeks ago
    • 187shark
      Tail light issue causing problems. Please help..
      by 187shark
      Hi all new to the community here. I have a 2014 RS 6 speed manual... and so about a year ago my tail lights got cracked and eventually the plastic housing...
      4 weeks ago

    FORUM SPONSORS

    Collapse
    Working...
    X