Welcome to the FirebirdV6.com/CamaroV6.com forums.
You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!
If you have any problems with the registration process or your account login, please contact contact us.
If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I'm replacing my fuel pump on my 93 camaro 3.4L soon. I have two quick questions:
when i remove the assembly, how do i tell which line is the return line?
second q, there are four lines coming out of the top of it. I know that one is a fuel feed line, a return line, and a vent line, but what is the fourth one?
mark the location before you remove anything, with tape or whatever.
Team NoVa
2000 Firebird- Intake, Pacesetters, !cat, full 2.5 to flowcrapster, 1.9 rockers, LS6 springs and Intense modded retainers, WS6 speedlines, T/A bumpers and hatch, 5 spd swapped, SOON TO BE nitrous'd and cammed.
why do you need to know what they are? as long as they go back in the right spots..are you planning to add something?
Team NoVa
2000 Firebird- Intake, Pacesetters, !cat, full 2.5 to flowcrapster, 1.9 rockers, LS6 springs and Intense modded retainers, WS6 speedlines, T/A bumpers and hatch, 5 spd swapped, SOON TO BE nitrous'd and cammed.
doing an LS1 swap. i'm swapping out the stock pump for a Walbro, and there's only one line that can go on the walbro pump (feed). but i will have a c5 filter/regulator, and the return needs to come off of that to the return on the tank. so i need to know which of the four lines it is.
2000 Firebird- Intake, Pacesetters, !cat, full 2.5 to flowcrapster, 1.9 rockers, LS6 springs and Intense modded retainers, WS6 speedlines, T/A bumpers and hatch, 5 spd swapped, SOON TO BE nitrous'd and cammed.
ok someone told me that the two quick connect fittings should be the fuel feed line and the return line. i just thought though, that to make sure, i could trace the feed going into the engine bay from the fuel filter, and then the OTHER fuel line in the engine bay would be the return to the tank, so i could just trace that to make sure also. that return line should be 5/16", slightly smaller than the 3/8" feed line.
ok someone told me that the two quick connect fittings should be the fuel feed line and the return line. i just thought though, that to make sure, i could trace the feed going into the engine bay from the fuel filter, and then the OTHER fuel line in the engine bay would be the return to the tank, so i could just trace that to make sure also. that return line should be 5/16", slightly smaller than the 3/8" feed line.
The larger quick connect line is always the supply line and the smaller quick connect is the return. Then there is a vent line and a vapor line. I believe the vapor line goes to the evaporation system. Which feeds the charcoal canister and eventually is directed into the intake to be burned. The vent line leads to a plastic valve which you can see if you look under the car around the differential housing mounted to the underside of the car.
The larger quick connect line is always the supply line and the smaller quick connect is the return. Then there is a vent line and a vapor line. I believe the vapor line goes to the evaporation system. Which feeds the charcoal canister and eventually is directed into the intake to be burned. The vent line leads to a plastic valve which you can see if you look under the car around the differential housing mounted to the underside of the car.
Exactly what I needed to know. THANK YOU!! :bowdown:
Hey everyone! I've been trying to remove my transmission for two days now! I need to replace the clutch. Only thing I've got left holding the transmission...
Hello, so I changed the front bearings on the bird and the ABS inoperative light came on. I made a mistake of not removing negative battery cable. Now...
I usually have to double, triple my headlight switch for them to come up on my 97 Firebird. I cleaned all connections. Could it be the headlight switch...
3 weeks ago
FORUM SPONSORS
Collapse
Working...
X
We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.
By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.
Tweet
Comment