Tweet
Replacing Plugs and wires today... I cant get ANY of the wires off the sparkplugs at all... how do you pull them off? This car has tubular manifolds on it.
-
1997 Camaro RS W/T-Tops<br />All Stock / 200 HP -
Re: 2002 Firebird Tuneup
they should pop off, they might be stuck on if its been a while, try lubricating them if not, just break them off if your replacing the wires anyways -
Re: 2002 Firebird Tuneup
First time to take them off is going to be hard. Learn your lesson (once they're replaced) by using dielectric grease.Comment
-
Re: 2002 Firebird Tuneup
it's all in the angle ;)WAWA-A-HOLIC
Comment
-
Re: 2002 Firebird Tuneup
You can try taking a crescent wrench and opening it up just enough to go around the wire behind the boot, and then twist the wrench.
Comment
-
Re: 2002 Firebird Tuneup
I just go with a pair of Mechanix Wear M-Pact 2 gloves... nice and padded so you don't bust your knuckles, and lets you really get in there and yank the plugs out. It really does just come down to proper application of force.Comment
-
Re: 2002 Firebird Tuneup
Wiggle the wires side to side, and yank hard.*Matt
Old people shouldnt use the internet.Comment
-
Re: 2002 Firebird Tuneup
if your doing plugs and wires use any means possible. its a b-i to get em off.Team NoVa
2000 Firebird- Intake, Pacesetters, !cat, full 2.5 to flowcrapster, 1.9 rockers, LS6 springs and Intense modded retainers, WS6 speedlines, T/A bumpers and hatch, 5 spd swapped, SOON TO BE nitrous'd and cammed.Comment
-
I’m new. I actually don’t own a Camaro or firebird. I do have a 2000 Camaro 3.8 fly by throttle and 4l60e. This is installed in a 1980 Triumph TR7...1 week ago -
Not much going on, replaced my Kenwood double din stereo with a Pioneer double din, the Kenwood had problems. Then replaced my power inverter for my reverse...1 week ago -
Hi all new to the community here. I have a 2014 RS 6 speed manual... and so about a year ago my tail lights got cracked and eventually the plastic housing...3 weeks ago
Comment