Tweet
Re: Intake options?
i have a custom lid i made from fiberglass, little taller than a slp lid
i have a custom lid i made from fiberglass, little taller than a slp lid
-
-
Re: Intake options?
So, you still have the same base for the stock air intake?Originally posted by Fondle View Post
As far as I noticed, that was only major difference between just having an air silencer delete and the FIPK.
You get a little bit better flow with the one piece plastic connector, and the filter is "open" in the engine bay... Whereas with a whisper/shaved lid, you still have the filter covered.
The only difference I could foresee in IATs is the fact that your lid is fiberglass... different insulating properties from plastic.Comment
-
Re: Intake options?
i have fipk, slp cold air, and ss hood and love it :)2001 Camaro 3.8 A4
1991 3000GT VR4
2001 Mitsubishi Eclipse GS
Comment
-
Re: Intake options?
I have my SS hood and the K&N in the drivers fenderwell, 3" flex tubing, hood has been drilled and cut for air flow to flow in and out the hood to help cool the engine, I had my AIT scanner on my Aeroforce scan gauge and at idle it was like 86 degrees close to outside temp then I got up to 60MPH and it slowly dropped to like 72-74 degrees. So thats a nice drop in temp just having it in the fender(but it it is in front so it catches alot of fresh air.)Coolant temp was about 175-180 degrees.08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engineComment
-
Re: Intake options?
slp cai (or FTRA, same thing) with a whisper lid is my jam---too bad whisper can't get their sh*t together, bc there's a huge demand for them.
the fipk isnt bad, i just prefer the lid, see if you can find one on an individual sale, or fork out the cash for the k&n setup.pacesetters|full 3" borla exhaust|3" stainless e-cutout|slp cai & ram intake|c/f whisper lid|tbs|eibach|kyb|stb|sfc's|adj.lca's & phb|slp fan|b&m t5|180*|z06 17x9.5|8000k hids|hptuners|d/s rotors
sigpic
gone in body, but not in spiritComment
-
Re: Intake options?
what about this....http://www.youngsfbody.com/inc/sdetail/17944 i just noticed this about of days ago and it supposed fits all v6'sComment
-
Re: Intake options?
Originally posted by Lilspleen View Post
That's the K&N FIPK... It's been out for quite a while, fits 99-02 v6's, 98 has an angled throttle body and is kinda S.O.L. on the after market intake field.
If I remember right from the dyno sheet that came with mine last weekend, it's good for about 7hp at the wheels.
That was on a 2000 Camaro with 70k miles, if my memory serves me.Comment
-
Re: Intake options?
K&N FIPKOriginally posted by inheritthefire View Post
part number: 57-3041
6.79 HP @ 5066 RPMComment
-
-
Re: Intake options?
no problem. i just looked that up on K&N's website lol.Originally posted by inheritthefire View PostComment
-
Re: Intake options?
so does it not work for a 98 :excited:Comment
-
Comment