Tweet
Anyone running it? And if so pics please..
-
-
Re: Pre-axle dump
Steve???? -
Re: Pre-axle dump
I'm running right before the axle, no pics its just a 3" turndown , so not too hard to do.08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engineComment
-
Re: Pre-axle dump
yup same...just comes out the side, just a mini tube welded on.
2002 SOM Z28 Camaro - 12.9 @ 104 mph
1996 3800 Camaro - 13.43 @ 100.77 mph
Project Cars | How To Guides | Scratch Repair | Synthetic OilComment
-
Re: Pre-axle dump
Well the muffler i got from you, Steve, won't fit and it's hanging down like 3"off the ground parked... I'm thinking it'll fit if I move it... up towards the y closer? Its hitting the tranny mount atm.Comment
-
Re: Pre-axle dump
To mount the one i sent you , most likey will have to go in the stock mufflers spot with a 3" turndown. Thats the way I ran it.08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engineComment
-
Re: Pre-axle dump
I'm getting it done up right on the end of the race muffler, for now. I'll get it all set up with my cutout and such after I get back from my road trip.Comment
-
Re: Pre-axle dump
I would put the race muffler where the CAT was and install the muffler in back where stock was , then you could have the cut out before the race muffler or aafter it wouldn't be bad idea.08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engineComment
-
Re: Pre-axle dump
That's my plan for it. Just not going to use up 3-400 I have for my trip.Comment
Comment