Tweet
Re: Exhaust on my DD car finally.
Oh ok. 8" inlet outlet!? Or just opens up to an 8" after the inlet?
Oh ok. 8" inlet outlet!? Or just opens up to an 8" after the inlet?
-
3M MAFIA
________
| Dynomax Catback | Auburn Posi | 3:42s | B&M Ripper | DIY CAI | PVC Mod |
Next on the list: GT2 Cam| 105# Springs |Headwork| Headers |
sigpic -
I think he means 8" circumference not diameter.
Sent from my SCH-I500 using TapatalkComment
-
Re: Exhaust on my DD car finally.
I was thinking that too.3M MAFIA
________
| Dynomax Catback | Auburn Posi | 3:42s | B&M Ripper | DIY CAI | PVC Mod |
Next on the list: GT2 Cam| 105# Springs |Headwork| Headers |
sigpicComment
-
Re: Exhaust on my DD car finally.
Steve, can you post a link with one close to yours? Ive been looking all over and havent found much, Im only finding ones like the one I posted from ebay.3M MAFIA
________
| Dynomax Catback | Auburn Posi | 3:42s | B&M Ripper | DIY CAI | PVC Mod |
Next on the list: GT2 Cam| 105# Springs |Headwork| Headers |
sigpicComment
-
08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engineComment
-
Re: Exhaust on my DD car finally.
Awesome, thank you. Im going to buy it tonight. 2 last questions lol. Did adding that make the exhaust more quiet or just gave it a deeper sound? And should I replace the exhaust from the Y pipe to the muffler to a 3" or would keeping it stock be fine?3M MAFIA
________
| Dynomax Catback | Auburn Posi | 3:42s | B&M Ripper | DIY CAI | PVC Mod |
Next on the list: GT2 Cam| 105# Springs |Headwork| Headers |
sigpicComment
-
Re: Exhaust on my DD car finally.
More quiet to reduce rasp, I'd go with 3" if you can.08' L76 6.0L 4X4 Chevy EXT.Cab LTZ Vortec MAX with Snug top cover, Dynomax exhaust,Hptuners& K&N intake
96' Camaro M5 to A4 conversion, alot of mods . GT35R Turbo full suspension. Built engineComment
-
Re: Exhaust on my DD car finally.
I've got full 3".Comment
-
Re: Exhaust on my DD car finally.
i had a gutted cat and goes to a muffler . and then it goes to, 2 . 3 inch tips. like im going to install my headers. and then put a highflow cat. where should my muffler go or should i dump it?Comment
-
Re: Exhaust on my DD car finally.
Depends on what kind of muffler.3M MAFIA
________
| Dynomax Catback | Auburn Posi | 3:42s | B&M Ripper | DIY CAI | PVC Mod |
Next on the list: GT2 Cam| 105# Springs |Headwork| Headers |
sigpicComment
-
Re: Exhaust on my DD car finally.
its a magnaflow and then it comes out to 2 tips i want no tips. just maybe a dumb. im still looking for exhaust optionsComment
-
Re: Exhaust on my DD car finally.
Single in dual out specific for an f-body? That will replace the factory one so it will sit behind the axle, you can do turndowns like I have. If you want to dump it before the axle ditch that muffler and buy a bullet muffler .3M MAFIA
________
| Dynomax Catback | Auburn Posi | 3:42s | B&M Ripper | DIY CAI | PVC Mod |
Next on the list: GT2 Cam| 105# Springs |Headwork| Headers |
sigpicComment
-
Re: Exhaust on my DD car finally.
Just a small update, as the muffler breaks in its starting to get a deeper tone, I may not put in the resonator, but we'll see.3M MAFIA
________
| Dynomax Catback | Auburn Posi | 3:42s | B&M Ripper | DIY CAI | PVC Mod |
Next on the list: GT2 Cam| 105# Springs |Headwork| Headers |
sigpicComment
Comment