SES light won't go away

[RaVeN1469]

I'm not sure if this is the right forum but I believe it's related to my intake lid. A while back I tried removing the air silencer on my own, well that failed misserably and a SES light appeared. Had it read and it said the idler valve has been dissabled by the PCM. So I got my real lid and eventually replaced the Idler valve. I disconnected the battery for an hour or two to clear the codes. Start up my car and no light, but a little while later it's back. Is this a known problem with whisper lids? What can I do to solve this problem?

[Wolfy]

by just disconnecting the batt won't resent the pcm not on the obdII, now some say that if you pull some fuses and the like turn the key on, not starting it, that that will reset the pcm, but my bud that is a good mechanic, or at least i think he is, he says that the obdII's will still store the code in the memory for emissions purposes.

do a search on how to reset the pcm, i can't remember the steps for y a

[Only4U]

go to www.installuniversity.com and somewhere on there it will tell you how to rid your car of the light.

[RaVeN1469]

Yeah I found that in my search for SES codes with lids so I gave it a try. Turned my ignition pulled the fuses and let it sit for at least 15 minutes. Code was gone for a little while but came back.

[RaVeN1469]

If it means anything I had the code scanned agian at autozone today (was having a missfire in #6, spark plug cable fell off :mad: ) But the code is P1652. IAC valve has been reset by PSP, failed On. Or something along those lines. I'm thinkin this might be something I'll have to take to the dealership if no one here knows what to do.