Throttle Bodys

[BirdmanV6]

Does anyone have a aftermarket throttle body on there v6 firebird. Also, does BBK make one and will it fit a 3.4 even though it says ls1? Your help is needed. What is your guy's opinion.

[BirdmanV6]

I'm taking it nobody knows?

[viper98885]

There are not any aftermarket throttle bodies for the 3.4L V6.

[Ryan94V6]

<blockquote>quote:</font><hr>Originally posted by viper98885:
There are not any aftermarket throttle bodies for the 3.4L V6.<hr></blockquote>
Wouldnt you have to customize it to fit? Im pretty sure to fit an LT1 throttle body you would.

[slacker69]

With a custom intake you can have a LT1 TB

http://tiago.phxchevy.com/Image14.jpg
http://tiago.phxchevy.com/Image04.jpg

[viper98885]

I was talking about a direct bolt-on throttle body. Of course, if you modify your intake manifold, you could put a throttle body from a Ferrari on it if you work hard enough.

[Ryan94V6]

<blockquote>quote:</font><hr>Originally posted by viper98885:
Of course, if you modify your intake manifold, you could put a throttle body from a Ferrari on it if you work hard enough.<hr></blockquote>
That would be pretty damn sick! :eek:

[viper98885]

Keep in mind that going with a bigger throttle body WILL allow more air in, but the velocity of the air will not be as great. You should really only go with a larger TB if you are doing heads and cam so that the engine can really breathe.

[SlowCamaro96]

I have read somewhere that MOST parts on LT1s (same year) will fit v6s... such as superchargers, possibly tbs. Just because the engine compartments are set up similarly. U guys know anything different?

[white96six]

do they make one for the 3.8? thanks.