Tweet
This weekend I'm going to the local muffler shop to get an estiment on a new exhaust setup. This is it: 2.5" pipes, no cat, cutout just before the rear axle, borla 2.5" inlet, dual 2.5" outlet, and quad borla intercooled tips. Will I notice a loss in lowend power while the computer adjusts itself to the new higher flow,and will this cause any perminent damage? Thanks for all the help!
-
\'95 Med. Quasar Blue Camaro 3.4 A4<br />Bunch o\' mods<br /><b>10.18 @ 67.60 mph 2.22 60 ft (1/8 mile)</b> <br /><br />-1986 Camaro with a carbed 350<br /><b>8.53 @ 81.45mph 1.8 60\'</b><br />AIM CamaroL32 -
Don't know how smart no cat would be. I would just put in a gutted or high flow cat, leave some backpressure. Also, you may trigger some engine lights with no cat. Not worth the trouble. -
Isn't a gutted cat the same as just putting a straight pipe in there? I mean wouldn't it just be a large opening in the pipes. I don't have to worry about getting caught really because we don't have vehicle inspections here in Iowa.\'95 Med. Quasar Blue Camaro 3.4 A4<br />Bunch o\' mods<br /><b>10.18 @ 67.60 mph 2.22 60 ft (1/8 mile)</b> <br /><br />-1986 Camaro with a carbed 350<br /><b>8.53 @ 81.45mph 1.8 60\'</b><br />AIM CamaroL32Comment
-
Try it... you don't have an oxygen sensor to worry about like the 3.8's do. If you don't like it then you can always get a high flow cat (which is what I'm gonna do)<b>Sean: 1994 Camaro daily driver</b>Comment
-
If your gonna run a cutout, you might as well put a cat on the car. Not sure how ur emissions are in IOWA, but in illinois, we need cats :( .
Gutted cat is a cheap way of putting in a straight pipe.
All-in-all, sounds like a sweet setup. But i would drop in a cat, at least a highflow cat.
Good luck! [img]graemlins/thumbsup.gif[/img]<a href=\"http://www.pbase.com/danny83/car_pix\" target=\"_blank\">http://www.pbase.com/danny83/root</a><br /><a href=\"http://community.webshots.com/user/ttopbird96\" target=\"_blank\">http://community.webshots.com/user/ttopbird96</a> [/URL]<br />00 NMB Formula M6<br />323.4HP, 336.5TQ<br />Lid, Filter, Cutout, all else stock :)<p>\"Let the modding begin!\"Comment
-
Getting a massage saying invalid interface, haven’t used it since last year probably November. First time in 23 years I had a problem. Going to get...13 hours ago -
-
need help finding a balancer and a replacement balancer bolt. im at a lost after confusing myself researching.4 days ago -
Hello every one, ozzy here ive been looking at this page for weeks now finally joined. So my question is why is it that every turbo build forum just ends...6 days ago
-
Comment