TB Spacers at ZZP!! $40!

[Ryan Trester]

Same question as above......and does anyone actually have one to say if it is worth the money or not????

[Craig Griffis]

It does not stop the coolant from circulating through the throttle body on V6 cars. That's an easy problem to fix in the LS1 cars.

[AllTheGoodNamesAreGone]

Originally posted by Craig Griffis:
It does not stop the coolant from circulating through the throttle body on V6 cars. That's an easy problem to fix in the LS1 cars.

yes it does..

I installed mine this weekend!

you will probably want to pick up a 45mm long m6 bolt to replace the bolt on the top or a m6 nut and use the stud.. the studs will work fine for the lower two..

BTw i am pretty happy with it.. and the results.. tb says cool as heck now!

[DARK SDE '02]

Ya I had to find 3 10mm nuts to fit on the double sided bolts they give you. It DOES block the coolant from flowing through the TB. I dunno what kind of gains you'll see from it but it's cheap so what the hell. I also have almost no space between my lid and the opening in the MAF/TB housing, a tight fit. I think just keeping the TB cooler alone is worth some power, but I'm not rich so I can't give ya any dyno numbers before/after.

[fabolous24]

Where exactly can I find this throttle body spacer???

[AllTheGoodNamesAreGone]

go to zzp's website.. and email zoomer or their customer service people and ask for it..

[firebird1]

well..... found my next mod... thanks kids.

[Zooomer]

http://www.zzperformance.com/zzp/pro...ody_spacer.htm

[firebird1]

how bad of an install is it?
can t be bad.

[AllTheGoodNamesAreGone]

Originally posted by firebird1:
how bad of an install is it?
can t be bad.

1/2 hour.. tops..

[firebird1]

1/2 hour.....

hopefully i can draw it out to a whole day; that way people leave me the hell alone :D

[firebird1]

anyone doing a write up for the review forum?

if not i think im gonna invest the time to do it....

[2Poor4Z]

this will be my next mod.. that along with porting the TB.. and a nice high polish

[DARK SDE '02]

I'd do a writeup but I didn't dyno before the spacer so I couldn't really post any numbers, just directions on how to install. Let me know if you have questions. A few parts might require a tiny bit on thinking/ENGINuity [img]smile.gif[/img]

[SlowCamaro96]

Hmm i think im going to dyno my car now that i have headers on... I might order one of these suckers and dyno it again afterwards. Let everyone know real numbers.