pacestter gaskets and y-pipe

[99davenport]

can someone give me a link where i can buy these individually my friend wrecked his camaro and gave me the headers but not the gaskets and y-pipe thanks for your time

[98Camaro3.8]

Don't think you can buy the y-pipe by itself, but gasket part # is G7209.

['94firebirdv6]

i wouldnt buy the cradboard pacesetter gaskets
do a search for pacesetter gaskets and u'll find alot of other options

[99W68Firebird]

no other option other than the ****ty cardboard ones.

[Wan2goFSTR]

Here's an alternative if you have a NAPA by you:
http://www.turbov6camaro.com/header.html
the part is listed near the bottom. I am going to try to use the pacesetter first but will let you know if I need thr others after the install.

[99davenport]

i contacted texas-speed they said they do sell individual y-pipes but had to check if they had any in warehouse and never got back to me i guess i will contact them monday. if not i will prob have to have them fabricated and that will cost some major $$$

[kristen]

call pase setter. i need new gaskets and i just told them what i needed and they shipped them right out!

[99davenport]

could you give me a contact #??

[jessica2112]

Here ya go:

PaceSetter Performance Products
P.O. Box 56397
Phoenix, AZ 85079-6397
Phone: (602) 266-1964
Fax: (602) 650-1136
Hours: 8am-4:30pm MST M-F
Customer Support: tech@pacesetterexhaust.com

[ellik]

Originally posted by Wan2goFSTR:
Here's an alternative if you have a NAPA by you:
http://www.turbov6camaro.com/header.html
the part is listed near the bottom. I am going to try to use the pacesetter first but will let you know if I need thr others after the install.

those are exactly what I used. thema and a little rtv to hold them in place while getting the bolts started and no leaks for me.

[99W68Firebird]

yea i had leaks with the Fel pros, bought the pacesetters had them put on lasted a day and now ticks again...... i dont understand

[Tyler]

Originally posted by ellik:
</font><blockquote>quote:</font><hr />Originally posted by Wan2goFSTR:
Here's an alternative if you have a NAPA by you:
http://www.turbov6camaro.com/header.html
the part is listed near the bottom. I am going to try to use the pacesetter first but will let you know if I need thr others after the install.

those are exactly what I used. thema and a little rtv to hold them in place while getting the bolts started and no leaks for me. </font>[/QUOTE]same here