Ok heres the deal: I took out the MAF screen and I did the IAT mod from radioshack. I drove the car a week or so with no problems. I finally decided that I better reset the computer, so I did. Now when I start the car it idles at 1500-2000 RPMS for a second or two, then it drops to 1000! It used to be 1000 always. After it drops, and I rev the engine and let off, it sticks at 2000 RPMS for a second or two and drops just like when it starts. It sucks. Any Ideas? Could my timing be messed up or what causes this? Thanks in advance! My car is Handicapped!!!
Announcement
Collapse
No announcement yet.
Handicapped Idle (MAF SCREEN REMOVED)
Collapse
X
-
<blockquote>quote:</font><hr>Originally posted by AZ3.8Camaro:
I finally decided that I better reset the computer, so I did. Any Ideas? Could my timing be messed up or what causes this? Thanks in advance! My car is Handicapped!!!<hr></blockquote>
No, you caused it by "resetting" the PCM. A power loss causes the PCM to reset to the base factory settings. The engine never runs with the factory settings. Now it has to recalculate everything. It was doing fine before you "reset" it.
I have said this over and over on this board, including in another post today. You never want to disconnect power to the PCM, unless you have to - and this was not a reason to.
[ February 25, 2002: Message edited by: FirebirdGT ]</p>Robert - owner www.FirebirdV6.com/CamaroV6.com
"Mid-life crisis? I'm way beyond that!"
1996 Black Firebird GTxxxRam Air V6 w/ M5xxxwww.FirebirdGT.com
Raven
Comment
-
<blockquote>quote:</font><hr>Originally posted by GregWS6'01:
The IAT mod is pointless...It's good for summer racing etc...now isn't a time to do it. You'll lose performance<hr></blockquote>
Well I'm glad someone else said it too. This mod only works at WOT in the summer. Other than that it does nothing, and degrades performance the colder it is.Robert - owner www.FirebirdV6.com/CamaroV6.com
"Mid-life crisis? I'm way beyond that!"
1996 Black Firebird GTxxxRam Air V6 w/ M5xxxwww.FirebirdGT.com
Raven
Comment
Latest Topics
Collapse
-
by ssms5411So my truck is finally getting some work done, after 17 years, Oil pressure sensor went out and it’s located under the lower intake manifold. Have to...1 week ago
-
Hey guys. For starters I’ve always been a big car guy, I love all types of cars and can appreciate all types of engineering. I’ve always been a Chevy...3 weeks ago
-
by ssms5411Getting a message saying invalid interface, haven’t used it since last year probably November. First time in 23 years I had a problem. Going to get...4 weeks ago
Comment