80 series muffler???????

[michael]

please help, the 80 series muffler by flowmaster sounds great on a camaro, v6, but one thing i dont understand, arent the 80 series mufflers 2 in 2 out, how did you guys make it a 1 in 2 out????? please help

[fbody4life]

read my post on PLEASE ENTER..COME ON

[shortdog273]

It means 2" in(coming from the Ipipe) and 2" out(exiting to the tailpipes). But you wanna get at least a 2.5" muffler for your camaro. As far as the dual exhaust, the flows have dual outlets. Get part #42583. It's not a true dual exhaust if that's what you wanna know.

[nofear_102]

what about the 3" in, dual 2.5 out, I was thinking of that my self. (43083)

[sped214]

your stock I pipe is only 2.25". Would be quite a stretch to fit a 3" inlet muffler, without any noticible gains.

[95TealCamaro]

I was looking at the 80 series too. I all see is 3" inlet and two 2.5" outlets. How can I get a smaller inlet into the muffler? Do they make them any smaller, or do I have to get a different series?

[nofear_102]

just a thought, but couldn't you use say 2.5" or 2.75" pipes from cat to 3" inlet and just use an adapter fitting?

Just wondering cause I wanna get the 80 too, wanna do 2.75" pipes with 3" high flow cat and use adapters if possible.

[shortdog273]

It'll work.

[shortdog273]

<blockquote>quote:</font><hr>Originally posted by 95TealCamaro:
I was looking at the 80 series too. I all see is 3" inlet and two 2.5" outlets. How can I get a smaller inlet into the muffler? Do they make them any smaller, or do I have to get a different series? <hr></blockquote>


Part#42583 has 2.5" in and out. It's for the older models, but it'll still work.

[RacerJ]

<blockquote>quote:</font><hr>Originally posted by sped214:
your stock I pipe is only 2.25". Would be quite a stretch to fit a 3" inlet muffler, without any noticible gains.<hr></blockquote>

You shouldn't have any problem using the 3" inlet. You can a) run a 3" I-pipe (which I would do if you're going to bother running a 3" inlet muffler...) or b) use a reducer from the inlet to the I-pipe.

[97Pcam6]

Trust us it will work [img]graemlins/toto.gif[/img]