Ok So this morning I went to check if my throttle body flap thing was opening 90 degrees (i'm tryin to do some little free stuff today on my car) anyway on one side there is this screen lookin thing like a screened in porch kinda screen... is that the MAF screen? I dunno much only enough to get myself into a heap of trouble [img]tongue.gif[/img] I dunno if I wanna remove it or not I saw two peice of dried grass stuck on the screen (tiny tiny peices) and I was just wonderin if I had removed that then would it be safe? of course that could have been from where I changed out the filter to K&N filter and during that those little blades fell behind the filter and thats all... not sure BUT BACK TO MY ORIGINAL QUESTION is that the MAF screen?
Announcement
Collapse
No announcement yet.
MAF Screen?
Collapse
X
-
MAF Screen?
96 3.8L V6 Camaro 5-Speed<br />Vroom Vroom<br />No Power Doors / No Power Locks<br />Removed Jack and Spare<br /><a href=\"http://www.cardomain.com/id/mikerob283\" target=\"_blank\">CarDomain - Mikerob283</a>Tags: None
-
Don't take it off. You have a 96 with an angled TB, so you'd probably get a rough idle and no gains from removing it. I took mine out, and it didn't do anything for me but give me a rough idle. Leave it in.1997 Y87 Camaro with a motor and some stuff.
-
Will do thanks
Oh and was it ok that I had a bit of watery oil in there? I noticed that when I pulled it off that little bit of what was runny and thin like water but has a oil smell to it was in there just a tad bit like a tablespoon or so... is that ok?
[ March 30, 2003: Message edited by: Speedin96 ]</p>96 3.8L V6 Camaro 5-Speed<br />Vroom Vroom<br />No Power Doors / No Power Locks<br />Removed Jack and Spare<br /><a href=\"http://www.cardomain.com/id/mikerob283\" target=\"_blank\">CarDomain - Mikerob283</a>
Comment
Latest Topics
Collapse
-
Hey guys. For starters I’ve always been a big car guy, I love all types of cars and can appreciate all types of engineering. I’ve always been a Chevy...4 days ago
-
by ssms5411Getting a massage saying invalid interface, haven’t used it since last year probably November. First time in 23 years I had a problem. Going to get...6 days ago
-
need help finding a balancer and a replacement balancer bolt. im at a lost after confusing myself researching.1 week ago
-
Hello every one, ozzy here ive been looking at this page for weeks now finally joined. So my question is why is it that every turbo build forum just ends...1 week ago
Comment