Did the TB spacer mod.... - FirebirdV6.com/CamaroV6.com Message Board

Announcement

Collapse
No announcement yet.

Did the TB spacer mod....

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Did the TB spacer mod....

    well I flushed my coolant put the spacer on from the advertisement on the top of the board which I will say came with everything I needed good instructions and came rather quickly....my TB isnt as hot anymore to the touch I wish I woulda done it yesterday before I went to the track to see if it gained anything....anyone else done this, you guys see any gains in the cooler weather? cause its kinda hot outside now so I dont expect to see too much ;)

    "Money can't buy me happiness, but I'm happiest when I can buy what I want"
    05' CTS-V
    00' Camaro - SOLD :(

  • #2
    Yep, geat mod [img]graemlins/thumbsup.gif[/img]

    I'm supplying Dee with some pics for the 95-97 3.8L install.
    ~Derrick <a href=\"http://www.appstate.edu/~do54457/\" target=\"_blank\"><i>My Webpage</i></a><br /><b>\'96 3.8L V6 M5 Firebird Y87</b> | <b>162.8 RWHP</b> / <b>196.7 RWTQ</b> <br /><b>•</b> SLP CAI <b>•</b> <a href=\"http://tech.firebirdv6.com/y87.html\" target=\"_blank\"><b>Y87</b> Package</a> - 3.23s <b>•</b> 180º thermo w/ fan switch <b>•</b> TB spacer from DEE<br />1991 Jeep Cherokee Laredo 4x4

    Comment


    • #3
      I just did mine yesterday too! I just had a very spirited drive and afterwards, I could just lay my hand on the throttle body no problem. Very cool to the touch. Intake was very hot. Throttle Response and overall performance was great even when the engine got near 210 degrees in traffic. This mod is a definate must have! Thanks DEE97GTP!

      [ December 21, 2002: Message edited by: AMinor65 ]</p>
      <b>1998 Firebird 3800 Series II, A4</b><br />Direct-Flo Lid,K&N Filter,DEE TB Spacer,TPS-TEC,ZZP Mini-AFC,Raised and Cutout Airbox 7mm,BMR STB & Boxed LCAs,KYB AGX Shocks,Drilled/Slotted Rotors,180* Thermo,2.5\" Catco Cat,Dynomax 2.75\" custom catback,Kumho Ecstas/245,Jet Stage 2,3.42,Edge Racing 2870 Stall,B&M Tranny Cooler,B&M Deep Tranny Pan,LSD,AAM Girdle,1LE DS,NX Wet Kit,MSD DIS-4,MSD Blaster Coil Packs,Taylor Spiro Pro 8mm Wires,NGK TR6\'S gapped .045,ZZP UD WP Pulley,SLP Fan Switch,TT II\'s<br />N/A: 15.6342 @ 88.44 (On stock converter. Strugglin\' to beat it.)<br />Nitrous 50 Shot: 14.7463 @ 93.49

      Comment


      • #4
        <blockquote>quote:</font><hr>Originally posted by AMinor65:
        I just did mine yesterday too! I just had a very spirited drive and afterwards, I could just lay my hand on the throttle body no problem. Very cool to the touch. Intake was very hot. Throttle Response and overall performance was great even when the engine got near 210 degrees in traffic. This mod is a definate must have! Thanks DEE97GTP!

        [ December 21, 2002: Message edited by: AMinor65 ]
        <hr></blockquote>

        did you drain all of your coolant first or just kinda let it splash out?....I guess I did a little overkill changing everything...for only 23k but I figured why not heh ;) .....oh ya thanks dee ;)

        "Money can't buy me happiness, but I'm happiest when I can buy what I want"
        05' CTS-V
        00' Camaro - SOLD :(

        Comment


        • #5
          When the car was cool, I let the little bit splash out. Man, antifreeze stinks!
          <b>1998 Firebird 3800 Series II, A4</b><br />Direct-Flo Lid,K&N Filter,DEE TB Spacer,TPS-TEC,ZZP Mini-AFC,Raised and Cutout Airbox 7mm,BMR STB & Boxed LCAs,KYB AGX Shocks,Drilled/Slotted Rotors,180* Thermo,2.5\" Catco Cat,Dynomax 2.75\" custom catback,Kumho Ecstas/245,Jet Stage 2,3.42,Edge Racing 2870 Stall,B&M Tranny Cooler,B&M Deep Tranny Pan,LSD,AAM Girdle,1LE DS,NX Wet Kit,MSD DIS-4,MSD Blaster Coil Packs,Taylor Spiro Pro 8mm Wires,NGK TR6\'S gapped .045,ZZP UD WP Pulley,SLP Fan Switch,TT II\'s<br />N/A: 15.6342 @ 88.44 (On stock converter. Strugglin\' to beat it.)<br />Nitrous 50 Shot: 14.7463 @ 93.49

          Comment


          • #6
            Will this mod work with the SLP CAI, space is purdy cramped as is in that area with the CAI. i was wondering if it would still fit? Also how much would i expect to pay for one and how hard is it to install?? Also any ses light problems?

            thanks
            bw
            1997 Firebird Convertable White, with custom Purple pin striping and custom Purple detailing!!!<br />Y87 Performance Package W68 Apperance Package<br />Boydes, aluminum rims 16\" BMR STB <br />SLP Cold Air Intake 3\"hiflow cat 3\" dynomax custom catback, 2.5\" Flowmaster 80. Slp Take off Shocks, Springs And Struts. Transgo shift kit with corvette servo!<br />Sony Explode CD Player Kicker Comp VR 12, and Explode 760Watt amp!!!<br />5% Tint on the side windows, Correction officially 2% on the side windows, or at least that is what the highpo said and 15% on my rear window<br />Yup Purdy Car!!

            Comment


            • #7
              it should work, only spaces it 1/4 in, and he has a X-Mas special for 35$ I paid 50....bolts + new gaskets come with it....go for it ;)

              "Money can't buy me happiness, but I'm happiest when I can buy what I want"
              05' CTS-V
              00' Camaro - SOLD :(

              Comment


              • #8
                Yeah, it's only 3/8", but he'sprobably could've come real close to an inch. At least he could've on my car, and I have the crooked intake plenum.
                <b>1998 Firebird 3800 Series II, A4</b><br />Direct-Flo Lid,K&N Filter,DEE TB Spacer,TPS-TEC,ZZP Mini-AFC,Raised and Cutout Airbox 7mm,BMR STB & Boxed LCAs,KYB AGX Shocks,Drilled/Slotted Rotors,180* Thermo,2.5\" Catco Cat,Dynomax 2.75\" custom catback,Kumho Ecstas/245,Jet Stage 2,3.42,Edge Racing 2870 Stall,B&M Tranny Cooler,B&M Deep Tranny Pan,LSD,AAM Girdle,1LE DS,NX Wet Kit,MSD DIS-4,MSD Blaster Coil Packs,Taylor Spiro Pro 8mm Wires,NGK TR6\'S gapped .045,ZZP UD WP Pulley,SLP Fan Switch,TT II\'s<br />N/A: 15.6342 @ 88.44 (On stock converter. Strugglin\' to beat it.)<br />Nitrous 50 Shot: 14.7463 @ 93.49

                Comment


                • #9
                  so will it work with the slp cai on a '97? I think I read on his site it wouldn't but has anyone tried it?
                  2000 Z28 M-6<br />Loudmouth, TSP Lid, MAF Ends<br />330 rwhp

                  Comment


                  • #10
                    Yes, it will!!! Give me some time and all get more pics of TB spacer installed.
                    ~Derrick <a href=\"http://www.appstate.edu/~do54457/\" target=\"_blank\"><i>My Webpage</i></a><br /><b>\'96 3.8L V6 M5 Firebird Y87</b> | <b>162.8 RWHP</b> / <b>196.7 RWTQ</b> <br /><b>•</b> SLP CAI <b>•</b> <a href=\"http://tech.firebirdv6.com/y87.html\" target=\"_blank\"><b>Y87</b> Package</a> - 3.23s <b>•</b> 180º thermo w/ fan switch <b>•</b> TB spacer from DEE<br />1991 Jeep Cherokee Laredo 4x4

                    Comment

                    Latest Topics

                    Collapse

                    There are no results that meet this criteria.

                    FORUM SPONSORS

                    Collapse
                    Working...
                    X